Infiniti G35 (V35) Sedan. Manual — part 311
CL-14
< ON-VEHICLE REPAIR >
CLUTCH PIPING
CAUTION:
Keep painted surface on the body or other parts free of clutch fluid. If it spills, wipe up immediately
and wash the affected area with water.
REMOVAL
Refer to the figure for removal procedure.
INSTALLATION
Refer to the figure for installation procedure.
• To fix clutch hose on bracket, position clutch hose clasp on the
emboss of bracket and drive lock plate vertically from above.
CAUTION:
• Be careful not to bend or twist clutch hose.
• Do not scratch or damage clutch hose.
• Tighten clutch tube flare nut to the specified torque.
CAUTION:
Be careful not to damage flare nut and clutch tube.
• After installation, bleed the air from the clutch hydraulic system.
CL-6, "Air Bleeding Procedure"
PCIB0681E
CSC (CONCENTRIC SLAVE CYLINDER)
CL-15
< REMOVAL AND INSTALLATION >
C
E
F
G
H
I
J
K
L
M
A
B
CL
N
O
P
REMOVAL AND INSTALLATION
CSC (CONCENTRIC SLAVE CYLINDER)
Exploded View
INFOID:0000000000956935
Removal and Installation
INFOID:0000000000956936
CAUTION:
• If transmission assembly is removed from the vehicle, always replace CSC (Concentric Slave Cylin-
der) body and CSC tube. Return CSC body insert to original position to remove transmission assem-
bly. Dust on clutch disc sliding parts may damage seal of CSC body and may cause clutch fluid
leakage.
• Do not disassemble CSC body.
• Keep painted surface on the body or other parts free of clutch fluid. If it spills, wipe up immediately
and wash the affected area with water.
REMOVAL
1.
Remove transmission assembly from the vehicle. Refer to
TM-26, "Removal and Installation"
JPDIB0018GB
1.
Transmission assembly
2.
CSC (Concentric Slave Cylinder)
body
3.
Dust cover
4.
CSC (Concentric Slave Cylinder)
tube
5.
Air bleeder valve
Refer to
CL-16
< REMOVAL AND INSTALLATION >
CSC (CONCENTRIC SLAVE CYLINDER)
2.
Remove CSC tube mounting bolt.
3.
Pull up the lock pin of the CSC body.
4.
Pull out the CSC tube (1) from the CSC body (2).
5.
Remove CSC tube and dust cover from transmission case.
6.
Remove air bleeder valve from CSC tube.
7.
Remove CSC body from transmission case.
INSTALLATION
JPDIB0012ZZ
JPDIB0019ZZ
JPDIB0031ZZ
JPDIB0020ZZ
CSC (CONCENTRIC SLAVE CYLINDER)
CL-17
< REMOVAL AND INSTALLATION >
C
E
F
G
H
I
J
K
L
M
A
B
CL
N
O
P
1.
Install CSC body to transmission case and then tighten mount-
ing bolts to the specified torque.
CAUTION:
• Do not reuse CSC body.
• Do not insert and operate CSC body because piston and
stopper of CSC body components may fall off.
2.
Install dust cover to transmission case.
CAUTION:
Be careful with the orientation of dust cover.
3.
Insert CSC tube to dust cover.
CAUTION:
• Do not reuse CSC tube.
• Be sure not to damage O-ring of CSC tube.
4.
Press down the lock pin of the CSC body.
5.
Insert the CSC tube (1) into the connector of the CSC body (2)
until it clicks.
6.
Install CSC tube mounting bolt and then tighten mounting bolt to
the specified torque.
JPDIB0020ZZ
: Vehicle front
JPDIB0021ZZ
JPDIB0023ZZ
JPDIB0031ZZ
JPDIB0012ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст