Infiniti G35 (V35) Sedan. Manual — part 1394
TM-268
< ON-VEHICLE REPAIR >
[5AT: RE5R05A]
AIR BREATHER HOSE
AIR BREATHER HOSE
2WD
2WD : Exploded View
INFOID:0000000000957170
2WD : Removal and Installation
INFOID:0000000000957171
REMOVAL
1.
Remove air cleaner case (RH). Refer to
2.
Remove exhaust front tube and center muffler with power tool. Refer to
.
3.
Remove exhaust mounting bracket. Refer to
4.
Disconnect heated oxygen sensor (bank 1) harness connector. Refer to
5.
Remove three way catalyst (right bank). Refer to
.
6.
Remove air breather hose.
INSTALLATION
Note the following, and install in the reverse order of removal.
CAUTION:
• When installing an air breather hose, do not to crush or block by folding or bending the hose.
• When inserting an air breather hose to the air breather tube, be sure to insert it fully until its end
reaches the tube bend “R” portion.
• Install A/T air breather hose to air breather tube so that the paint mark is facing upward.
• Ensure clips are securely installed to brackets when installing A/T breather hose to brackets.
• When inserting air breather hose to air breather box, be sure to insert it fully until its end reaches the
stop.
• Install A/T air breather hose to air breather box so that the paint mark is facing backward.
1.
A/T breather box
2.
Air breather hose
3.
Clip
4.
Clip
5.
A/T fluid charging pipe
A.
Air breather tube
JSDIA0135ZZ
AIR BREATHER HOSE
TM-269
< ON-VEHICLE REPAIR >
[5AT: RE5R05A]
C
E
F
G
H
I
J
K
L
M
A
B
TM
N
O
P
• Install clip (1) at the paint mark (A).
AWD
AWD : Exploded View
INFOID:0000000000957172
AWD : Removal and Installation
INFOID:0000000000957173
REMOVAL
1.
Remove air cleaner case (RH). Refer to
2
: Air breather hose
3
: Harness
SCIA8268E
1.
A/T fluid charging pipe
2.
Air breather hose
3.
Clip
A.
Air breather tube
JPDIA0046ZZ
TM-270
< ON-VEHICLE REPAIR >
[5AT: RE5R05A]
AIR BREATHER HOSE
2.
Remove exhaust front tube and center muffler with power tool. Refer to
.
3.
Remove exhaust mounting bracket. Refer to
4.
Disconnect heated oxygen sensor (bank 1) harness connector. Refer to
.
5.
Remove three way catalyst (right bank). Refer to
.
6.
Remove air breather hose.
INSTALLATION
Note the following, and install in the reverse order of removal.
CAUTION:
• When installing an air breather hose, be careful not to be crushed or blocked by folding or bending
the hose.
• When inserting an air breather hose to the air breather tube, be sure to insert it fully until its end
reaches the tube bend “R” portion.
• Install air breather hose to air breather tube so that the paint mark is facing upward.
A/T FLUID COOLER TUBE
TM-271
< ON-VEHICLE REPAIR >
[5AT: RE5R05A]
C
E
F
G
H
I
J
K
L
M
A
B
TM
N
O
P
A/T FLUID COOLER TUBE
2WD
2WD : Exploded View
INFOID:0000000000957174
2WD : Removal and Installation
INFOID:0000000000957175
REMOVAL
1.
Remove the front and rear engine undercover with power tool.
2.
Remove the exhaust mounting bracket. Refer to
3.
Remove the suspension member stay. Refer to
4.
Pull out the A/T fluid cooler hose from the A/T fluid cooler tube. Refer to
1.
Engine assembly
2.
A/T assembly
3.
Copper washer
4.
A/T fluid cooler tube
5.
Bracket
Refer to
JPDIA0053GB
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст