Infiniti G35 (V35) Sedan. Manual — part 1386
TM-236
< ON-VEHICLE REPAIR >
[5AT: RE5R05A]
CONTROL ROD
CONTROL ROD
2WD
2WD : Exploded View
INFOID:0000000000957144
2WD : Removal and Installation
INFOID:0000000000957145
REMOVAL
1.
Disconnect control device and control rod. Refer to
.
2.
Remove manual lever from A/T assembly.
3.
Remove control rod from manual lever.
INSTALLATION
Install in the reverse order of removal.
2WD : Inspection and Adjustment
INFOID:0000000000957146
ADJUSTMENT AFTER INSTALLATION
Adjust A/T positions after installing control rod. Refer to
TM-230, "2WD : Inspection and Adjustment"
.
INSPECTION AFTER INSTALLATION
Check A/T positions after adjusting A/T positions. Refer to
TM-230, "2WD : Inspection and Adjustment"
AWD
AWD : Exploded View
INFOID:0000000000957147
1.
Control rod
2.
Plain washer
3.
Manual shaft
4.
A/T assembly
5.
Manual lever
6.
Washer
7.
Snap pin
8.
Conical washer
9.
Insulator
10.
Collar
for symbols in the figure.
JPDIA0004GB
CONTROL ROD
TM-237
< ON-VEHICLE REPAIR >
[5AT: RE5R05A]
C
E
F
G
H
I
J
K
L
M
A
B
TM
N
O
P
AWD : Removal and Installation
INFOID:0000000000957148
REMOVAL
1.
Disconnect control device and control rod. Refer to
2.
Remove manual lever from A/T assembly.
3.
Remove control rod from manual lever.
INSTALLATION
Install in the reverse order of removal.
AWD : Inspection and Adjustment
INFOID:0000000000957149
ADJUSTMENT AFTER INSTALLATION
Adjust A/T positions after installing control rod. Refer to
TM-230, "AWD : Inspection and Adjustment"
.
INSPECTION AFTER INSTALLATION
Check A/T positions after adjusting A/T positions. Refer to
TM-230, "AWD : Inspection and Adjustment"
1.
Control rod
2.
Plain washer
3.
Manual shaft
4.
A/T assembly
5.
Manual lever
6.
Washer
7.
Snap pin
8.
Conical washer
9.
Insulator
10.
Collar
for symbols in the figure.
JPDIA0004GB
TM-238
< ON-VEHICLE REPAIR >
[5AT: RE5R05A]
PADDLE SHIFTER
PADDLE SHIFTER
Exploded View
INFOID:0000000000957150
Removal and Installation
INFOID:0000000000957151
REMOVAL
1.
Park the vehicle on a level surface.
2.
Remove the driver air bag module. Refer to
3.
Remove the steering wheel. Refer to
4.
Remove the column cover. Refer to
.
1.
Steering column assembly
2.
Paddle shifter (shift-down)
3.
Paddle shifter (shift-up)
Refer to
for symbols in the figure.
JPDIA0051GB
PADDLE SHIFTER
TM-239
< ON-VEHICLE REPAIR >
[5AT: RE5R05A]
C
E
F
G
H
I
J
K
L
M
A
B
TM
N
O
P
5.
Remove the vehicle harness connector (C) and (D) from paddle
shifter.
6.
Remove the paddle shifter mounting bolts (E) and nuts (F).
7.
Remove the paddle shifter from the steering column assembly.
INSTALLATION
Install in the reverse order of removal.
A
: Side of paddle shifter (shift-down)
B
: Side of paddle shifter (shift-up)
JPDIA0052ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст