Infiniti G35 (V35) Sedan. Manual — part 406
DLN-58
< DISASSEMBLY AND ASSEMBLY >
[TRANSFER: ETX13B]
FRONT CASE AND REAR CASE
DISASSEMBLY AND ASSEMBLY
FRONT CASE AND REAR CASE
Exploded View
INFOID:0000000000957291
Disassembly
INFOID:0000000000957292
1.
Remove drain plug and filler plug.
1.
Drive chain
2.
Front drive shaft rear bearing
3.
Front drive shaft
4.
Front drive shaft front bearing
5.
Sprocket
6.
Mainshaft
7.
Needle bearing
8.
Snap ring
9.
Mainshaft bearing
10. Front case
11.
Front oil seal
12. Mainshaft oil seal
13. Oil cover
14. Temperature sensor
15. Electric controlled coupling
16. Spacer
17. Snap ring
18. O-ring
19. Oil gutter
20. Drain plug
21. Baffle plate
22. Rear bearing
23. Snap ring
24. Spacer
25. Rear oil seal
26. Companion flange
27. Self-lock nut
28. Breather tube
29. Rear case
30. Harness bracket
31. Retainer
32. Filler plug
33. Gasket
PDIA0244E
FRONT CASE AND REAR CASE
DLN-59
< DISASSEMBLY AND ASSEMBLY >
[TRANSFER: ETX13B]
C
E
F
G
H
I
J
K
L
M
A
B
DLN
N
O
P
2.
Remove mainshaft oil seal from front case, using a flat-bladed
screwdriver.
CAUTION:
Never damage the front case and mainshaft.
3.
Remove front oil seal from front case, using a flat-bladed screw-
driver.
CAUTION:
Never damage the front case and front drive shaft.
4.
Remove self-lock nut.
5.
Put a matching mark on the end of mainshaft. The mark should
be in line with the mark on the companion flange.
CAUTION:
For matching mark, use paint. Never damage mainshaft.
6.
Remove companion flange, using a puller.
CAUTION:
Never damage the companion flange.
7.
Remove rear oil seal from rear case, using the puller [SST:
KV381054S0 (J-34286)].
CAUTION:
Never damage the rear case.
PDIA0507J
PDIA0255E
SDIA2378E
PDIA0258E
PDIA0259E
DLN-60
< DISASSEMBLY AND ASSEMBLY >
[TRANSFER: ETX13B]
FRONT CASE AND REAR CASE
8.
Remove spacer (1) from mainshaft.
9.
Remove front case and rear case fixing bolts, then remove har-
ness bracket.
10. Separate front case and rear case. Then, remove front case by
levering it up with a tire lever or the like.
CAUTION:
Never damage the mating surface.
11. Remove snap ring from front case.
JSDIA0097ZZ
Bolts symbol
Quantity
Bolt length “
” mm (in)
A
11
42 (1.65)
B
1
162 (6.38)
C
1
97 (3.82)
TORX bolts
1
40 (1.57)
PDIA0251E
SDIA2460E
PDIA0267E
FRONT CASE AND REAR CASE
DLN-61
< DISASSEMBLY AND ASSEMBLY >
[TRANSFER: ETX13B]
C
E
F
G
H
I
J
K
L
M
A
B
DLN
N
O
P
12. Remove mainshaft bearing from front case, using the drift [SST:
KV38100300 (J-25523)].
13. Remove drive chain and front drive shaft while tapping front
drive shaft with plastic hammer.
CAUTION:
Never tap drive chain.
14. Remove oil gutter (1) from rear case.
15. Remove oil cover bolt and sensor fixing bolt from rear case. And
then, remove oil cover.
16. Remove retainer (1) from AWD solenoid harness connector.
17. Remove AWD solenoid harness connector from rear case.
18. Remove O-ring from AWD solenoid harness connector.
PDIA0256E
PDIA0257E
JSDIA0098ZZ
SDIA2403E
JSDIA0100ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст