Infiniti I30 (A33). Manual — part 457
Control Panel Mode
=NHEL0301
APPLICATION ITEMS
NHEL0301S01
Mode
Description
Reference page
Display Auto Open
Display can be set to open by either of the following controls.
I
Display will be opened when OPEN/CLOSE SW is selected with Key SW positioned
ACC.
I
Display will be automatically opened when Key SW is turned from OFF to ACC.
GPS Information
The GPS data includes longitude, latitude and altitude (distance above sea level) of the
present vehicle position, and current date and time for the area in which the vehicle is
being driven.
Also indicated are the GPS reception conditions and the GPS satellite position.
Quick Stop Customer
Setting
One facility of your selection can be added to your Quick Stop.
Route Priorities
Priorities of search request and automatic re-searching can be set for route search.
Tracking
Tracking to the present vehicle position can be displayed.
Display Setting
The following display settings can be customized.
I
Display color (Day mode or Night mode)
I
Brightness of display
Heading
Heading of the map display can be customized for either north heading or the actual
driving direction of the vehicle.
Nearby Display Icons
Icons of facilities can be displayed.
Facilities to be displayed can be selected from the variety selections.
Adjust Current Loca-
tion
Current location of position marker can be adjusted. Direction of position marker also
can be calibrated when heading direction of the vehicle on the display is not matched
with the actual direction.
Avoid Area Setting
Particular area can be avoided when routing.
—
Beep On/Off
Beep sounds which corresponds to the system operation can be activated/deactivated.
Clear Memory
Address book, Previous destination or Avoid area can be deleted.
SEL633X
HOW TO PERFORM CONTROL PANEL MODE
NHEL0301S02
1.
Start the engine.
2.
Push “OPEN/CLOSE” switch and then open the display.
3.
Push “SETTING” switch.
I
For further procedures, refer to the following pages which
describe each application item of the control panel mode.
SEL619X
“DISPLAY AUTO OPEN” MODE
NHEL0301S03
1.
Start the engine.
2.
Push “OPEN/CLOSE” switch and then open the display.
3.
Push “SETTING” switch.
4.
Select “System Setting”.
GI
MA
EM
LC
EC
FE
AT
AX
SU
BR
ST
RS
BT
HA
SC
IDX
NAVIGATION SYSTEM
Control Panel Mode
EL-497
SEL638X
5.
Select “Display Auto Open”.
SEL621X
6.
Select “Auto” or “Manual” icon.
I
To manually open the display, select “Manual”.
I
To automatically open the display, select “Auto”.
7.
Push “MAP” switch, then the display will go back to the current
location map.
SEL639X
“GPS INFORMATION” MODE
NHEL0301S04
1.
Start the engine.
2.
Push “OPEN/CLOSE” switch and then open the display.
3.
Push “SETTING” switch.
4.
Select “System Setting”.
5.
Select “GPS information”.
SEL146W
6.
Then GPS information will be displayed.
SEL640X
“QUICK STOP CUSTOMER SETTING” MODE
NHEL0301S05
1.
Start the engine.
2.
Push “OPEN/CLOSE” switch and then open the display.
3.
Push “SETTING” switch.
4.
Select “System Setting”.
5.
Select “Quick Stop Customer Setting”.
NAVIGATION SYSTEM
Control Panel Mode (Cont’d)
EL-498
SEL544X
6.
Select an item from the list.
SEL545X
“ROUTE PRIORITIES” MODE
NHEL0301S06
1.
Start the engine.
2.
Push “OPEN/CLOSE” switch and then open the display.
3.
Push “SETTING” switch.
4.
Select “System Setting”.
5.
Select “Route Priorities”.
SEL546X
6.
Select an item from the list.
SEL547X
“TRACKING” MODE
NHEL0301S07
1.
Start the engine.
2.
Push “OPEN/CLOSE” switch and then open the display.
3.
Push “SETTING” switch.
4.
Select “System Setting”.
5.
Select “Tracking”.
SEL548X
6.
Select “On” or “Off” icon.
I
To leave no trail on the map, select “Off”.
I
To leave a trail in the map, select “On”.
7.
Push “MAP” switch, then the display will go back to the current
location map.
NOTE:
When a trail display is turned OFF, trail data is erased from the
memory.
GI
MA
EM
LC
EC
FE
AT
AX
SU
BR
ST
RS
BT
HA
SC
IDX
NAVIGATION SYSTEM
Control Panel Mode (Cont’d)
EL-499
SEL560X
SEL561X
“DISPLAY SETTING” MODE
NHEL0301S08
Display Color Setting
NHEL0301S0801
1.
Start the engine.
2.
Push “OPEN/CLOSE” switch and then open the display.
3.
Push “SETTING” switch.
4.
Select “System Setting”.
5.
Select “Color”. Display color will change to Day mode/Night
mode.
6.
Select “MAP” switch, then the display will go back to the cur-
rent location map.
NOTE:
I
Display color can be changed independently when light-
ing switch is turned on and off.
I
Initial setting of the color is as follows:
When lighting switch is turned off: Day mode
When lighting switch is turned on: Night mode
SEL562X
Brightness Setting
NHEL0301S0802
1.
Start the engine.
2.
Push “OPEN/CLOSE” switch and then open the display.
3.
Push “SETTING” switch.
4.
Select “System Setting”.
5.
Select “Bright” or “Dark” to adjust the brightness of display.
6.
Select “MAP” switch, then the display will go back to the cur-
rent location map.
NOTE:
Display brightness can be adjusted independently when light-
ing switch is turned on and off.
SEL549X
“HEADING” MODE
NHEL0301S09
1.
Start the engine.
2.
Push “OPEN/CLOSE” switch and then open the display.
3.
Push “SETTING” switch.
4.
Select “System Setting”.
5.
Select “Heading”.
NAVIGATION SYSTEM
Control Panel Mode (Cont’d)
EL-500
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст