Volkswagen Golf / Golf GTI / Jetta. Manual — part 903
01-388
Seat and mirror settings for
normal driving, storing
- Switch on ignition.
- Set the seat.
- Set both exterior mirrors.
The settings are now stored on the
selected memory button.
The stored settings can be recalled
via the memory buttons (-1- to -3-)
as well as via the radio wave remote
control.
Allocating a seat adjustment to a
radio wave remote control button is
described at the end.
Note:
- Now press one of the memory
buttons (-1- to -3-) and hold it
depressed for about 3 seconds
until an acoustic signal confirms
that the settings are stored in the
memory.
When the vehicle battery is
disconnected all the data stored
for the seat and mirror settings
are lost.
For future versions of the control
module this data will be retained
even when the battery is
disconnected.
Each time settings are stored on
a button the previous data will be
erased.
Driver's side seat adjustment, On Board Diagnostic (OBD)
13/2/2005
01-389
Mirror setting for reversing,
storing
This function cannot be performed
until the seat/mirror settings for
driving forwards have been stored
Page 01-388
.
- Switch on ignition.
- Set mirror adjustment switch to
right mirror.
- Select reverse gear.
- Set the mirror to the desired
position.
The settings are now stored on the
selected memory button.
The stored settings can be recalled
via the memory buttons (-1- to -3-)
as well as via the radio wave remote
control.
Allocating a seat adjustment to a
radio wave remote control button is
described at the end.
- Now press one of the memory
buttons (-1- to -3-) and hold it
depressed for about 3 seconds
until an acoustic signal confirms
that the settings are stored in the
memory.
Driver's side seat adjustment, On Board Diagnostic (OBD)
13/2/2005
01-390
Note:
When the vehicle battery is disconnected all the
data stored for the seat and mirror settings are
lost.
For future versions of the control module this
data will be retained even when the battery is
disconnected.
Each time settings are stored on a button the
previous data will be erased.
As soon as reverse gear is engaged the right
exterior mirror moves into the currently stored
position or into the previous set position. This
procedure will be interrupted if the mirror is
manually adjusted to a new position.
As soon as the reverse gear is disengaged the
right exterior mirror will move back to the
position stored for normal driving.
Every time the seat and mirror adjustment for
normal driving is changed, the individual setting
for the right exterior mirror for reversing must
also be reset, otherwise the previously set
position is active.
Driver's side seat adjustment, On Board Diagnostic (OBD)
13/2/2005
01-391
Allocating radio wave remote control
key to memory buttons
After storing the seat and mirror settings
Page
01-388
there is a 10 second period where the
radio wave remote control key can be allocated
to the appropriate memory button.
The number of the radio wave remote control key
will be transferred from the convenience system
central control module via the CAN bus to the
memory control module.
- Pull the radio wave remote control key out of the
ignition lock.
- Press the open button of the radio wave remote
control key and hold it depressed for at least 1
second until an acoustic signal confirms the
allocation.
The settings are stored under the selected
memory button.
Driver's side seat adjustment, On Board Diagnostic (OBD)
13/2/2005
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст