Volkswagen Golf / Golf GTI / Jetta. Manual — part 904
01-392
Note:
If the remote control key was previously
allocated to a different memory button, the old
allocation will be erased.
If the radio wave remote control key is allocated
to a memory button to which another button is
already allocated, the old allocation will also in
this case be erased.
The allocation of a radio wave remote control
key to a memory button will be retained even
when new seat and mirror settings are stored
on this button.
When the vehicle battery is disconnected all
allocations for radio wave remote control keys
to the memory buttons will be erased.
For future versions of the control module this
data will be retained even when the battery is
disconnected.
Driver's side seat adjustment, On Board Diagnostic (OBD)
13/2/2005
01-393
Seat and mirror settings for normal
driving, activating
The settings stored can be activated via the
memory buttons as well as by the radio wave
remote control.
Activating via the memory buttons
For safety reasons the seat and mirror settings
can only be activated with the ignition switched
off.
There are two possibilities for activating the
stored settings:
One touch automatic memory:
- With driver's door open briefly press the desired
memory button. The seat and exterior mirrors
move automatically to the stored positions.
Push and hold memory:
- With the driver's door opened or closed press
the desired memory button until the seat and
exterior mirrors have moved into the stored
positions.
Activating via the radio wave remote control
For safety reasons the seat and mirror settings
can only be activated with the ignition switched
off.
- Briefly press the opening button of the radio
wave remote control and then open the driver's
door. The seat and exterior mirrors move
automatically into the stored position.
Driver's side seat adjustment, On Board Diagnostic (OBD)
13/2/2005
01-394
Mirror setting for reversing, activating
- Set mirror change-over switch to the right
exterior mirror.
- Engage reverse gear. The right exterior mirror
moves automatically into the stored position.
Note:
As soon as the reverse gear is disengaged the
right exterior mirror moves back to the position
stored for normal driving.
Driver's side seat adjustment, On Board Diagnostic (OBD)
13/2/2005
01-395
Seat adjustment, initiating On Board
Diagnostic (OBD)
Test prerequisites:
Voltage supply and fuses for the respective
system OK.
To initiate the On Board Diagnostic (OBD) the
ignition must be switched on "Terminal 15 on".
Note:
If the display remains blank, check V.A.G 1551
voltage supply according to wiring diagram.
Electrical Wiring Diagrams, Troubleshooting &
Component Locations
Additional operating information can be printed
out depending on the program by pressing the
HELP button of V.A.G 1551.
The
button is used for advancing the
program sequence.
The PRINT button is used for switching on the
printer (warning lamp in button lights up).
Connecting scan tool
Page 01-3
- Switch on ignition.
- Switch on printer with Print button (warning lamp
in button lights up).
Driver's side seat adjustment, On Board Diagnostic (OBD)
13/2/2005
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст