Volkswagen Golf / Golf GTI / Jetta. Manual — part 934
80-13
Passenger's air outlet (Golf and
Jetta), removing
CAUTION!
Be careful not to damage
instrument panel when removing
outlet. Protect instrument panel in
area of trim with adhesive tape
before removing.
Jetta only:
Repair Manual, Body Interior,
Repair Group 68
- Insert small screwdriver between
air outlet housing and instrument
panel and gently pry air outlet
housing out from opening.
- Pull out air outlet
- Remove glove box
- Disconnect electrical connection
for air outlet illumination.
Heating and ventilation system, servicing
13/2/2005
80-14
Driver's air outlet (Golf and Jetta),
removing
First do the following:
- Turn (light switch) rotary switch to
"0" position.
- Press rotary part inward -1- and
turn slightly to right -2-
- Hold rotary part in this position
and pull light switch out -3-.
- Disconnect electrical connection.
Jetta only:
Repair Manual, Body Interior,
Repair Group 68
- Remove screw -arrow-.
- Pull out air outlet
- Remove glove box
- Disconnect electrical connection
for air outlet illumination.
Heating and ventilation system, servicing
13/2/2005
80-15
Heating and ventilation
controls, removing and
installing
Special tools and equipment
required
First do the following:
Repair Manual, Body-Interior,
Repair Group 68
Repair Manual, Body-Interior,
Repair Group 68
Repair Manual, Body-Interior,
Repair Group 68
Removing
Special hook 3370
- Remove glove box
- Remove steering column cover.
- Remove center console.
Pull off heating controls trim
panel with tool 3370.
Heating and ventilation system, servicing
13/2/2005
80-16
After removing controls, check all
cables for free movement.
- Remove screws -arrows-.
- Remove center trim.
- Remove controls with cables
attached.
- Disengage cables from controls.
- Disconnect electrical connectors.
Installing
Note:
- Move cables back and forth in
direction of arrows.
- Replace cables that are damaged
or hard to move.
Cable sleeve ends are color
coded.
All air flaps must audibly move
onto end stops when turning
controls.
Always check cables before
installing. Replace binding or
damaged cables.
Heating and ventilation system, servicing
13/2/2005
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст