Volkswagen Golf / Golf GTI / Jetta. Manual — part 726
2. Bolts
¡
2 Nm
3. Additional bolts
¡
2 Nm
4. Front wheel housing liner
- Install speed nut on front valance spoiler and then bolt
front wheel housing liner and front valance spoiler, item - 3
-
Additional bolts (Front view)
1. Front wheel housing liner
2. Additional bolts
¡
2 Nm
3. Bolts
¡
2 Nm
4. Front valance spoiler
Sill panel extension (Golf GTI, Golf R32)
Special components of Golf "GTI 337 Edition"/Jetta GLI Sport and Golf R32
13/2/2005
Assembly overview
1. Sill panel extension
¡
Removing
66-8, Sill panel
extension, removing
¡
Installing
66-8, Sill panel
extension, installing
¡
Installation notes
66-8,
Installation notes
¡
Material PUR-RIM
2. Lower adhesive surface on sill
panel extension
3. Bolt
¡
Qty. 4
Special components of Golf "GTI 337 Edition"/Jetta GLI Sport and Golf R32
13/2/2005
¡
2 Nm
4. Upper adhesive surface on sill
panel extension
5. Sill panel
¡
Preparation
66-8, Preparing
bodywork for adhesive
6. Upper primer surface on sill
panel extension
7. Lower primer surfaces on sill
panel
8. PUR adhesive sealant
¡
Minimum curing time
66-8,
Minimum curing time
Sill panel extension, removing
Special components of Golf "GTI 337 Edition"/Jetta GLI Sport and Golf R32
13/2/2005
Caution!
When disassembling special
components, a cutting cable must not
be used because of danger of
damaging painted surfaces.
- Clean dirt from all seams so that no
damage to paint will occur when
removing components.
- Cover sidemember with tape at top part
of extended sill panel in order to prevent
damage to paint by cutting cord.
- Remove two bolts - 1 - in front
wheelhousing.
- Cut through three lower adhesive
surfaces of sill panel extension using
pulling handles and cutting cord.
Special components of Golf "GTI 337 Edition"/Jetta GLI Sport and Golf R32
13/2/2005
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст