Volkswagen Golf / Golf GTI / Jetta. Manual — part 1229
Engine code(s) AWW and AWP
- Loosen screws - arrows - and remove engine cover
upward.
- Remove hex nut - arrow - and vacuum reservoir - 1 - .
- Remove screws - arrows - and vacuum reservoir bracket
- 1 - .
Description of work (part 2 of 2)
13/2/2005
- Remove ignition coils together with spark plug connectors
manually.
Spark plugs
VW Part No.
101 000 063 AA
Manufacturer designation
PFR 6 Q
Spark gap
MAX. 0.8 mm
Tightening torque
30 Nm
- Remove spark plugs using Spark plug wrench VAS
3122B .
- Install spark plugs with spark plug wrench.
- Install ignition coils together with spark plug connectors.
Description of work (part 2 of 2)
13/2/2005
- Install vacuum reservoir bracket - 1 - and tighten screws -
arrows - .
- Install vacuum reservoir - 1 - and tighten hex nut - - arrow
- .
- Place engine cover and tighten screws - arrows -
Engine code BDF
- Remove engine cover - 1 - upward.
- Release ignition coil connector - 1 - at ignition coil - 2 -
and remove.
- Remove ignition coils using Puller T10095 .
Description of work (part 2 of 2)
13/2/2005
- Remove spark plugs using using Spark plug wrench VAS
3122B
Spark plugs
VW Part No.
101 000 062 AB
Manufacturer designation
PZF R5D-11
Spark gap
MAX. 1.1 mm
Tightening torque
30 Nm
- Install spark plugs with spark plug wrench.
- Push ignition coils - 2 - onto spark plugs.
- Push ignition coil connectors - 1 - onto ignition coils and
engage.
- Check that ignition wiring and spark plug connectors are
seated securely.
Description of work (part 2 of 2)
13/2/2005
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст