Volkswagen Golf / Golf GTI / Jetta. Manual — part 669

- Pull operating lever - 1 - in direction of -
arrow - .

- Using a screwdriver, tension spring - 2 -
secured to door lock in direction of -
arrow - and engage lock lever into
spring.

Note :
Lock is secured by engaging operating
lever. Thereby later "incorrect" clipping-in
of Bowden cable is prevented.

- Insert carrier assembly into door.

Front door

13/2/2005

- Tighten all bolts. Tighten bolts marked - 1 - and - 2 - in
reverse order of removal.

Tightening torque: 8 Nm

- Remaining bolts can be tightened in any sequence.

- Press door window - 3 - into window guide - arrow - and
tighten clamping brackets with bolts - 4 - .

Tightening torque: Plastic clamping brackets 9 Nm,
aluminum clamping brackets 11 Nm.

- Then, perform in reverse order of removal.

Then, perform a function load test.

Locking knob for locking rod, removing and
installing

Following descriptions of removing and installing locking
knob must always be observed.

If disregarded, locking rods may rotate out of front door
locks and relays may rotate into rear doors/damage
mounts.

Removing

Right front and left rear door

- Unscrew locking knob 180 to left.

Front door

13/2/2005

- Remove locking knob upward - arrow - .

Installing

Right front and left rear door

- Attach locking knob onto locking rod with marking -small
point on top side- toward vehicle interior side.

- Press locking knob onto locking rod only as far until
corrugation is at height of door trim.

- Then screw locking knob 180 to left.

When locked, locking knob can be approx. 02 mm over
door trim.

Removing

Left front and right rear door

- Unscrew locking knob 180 to right.

Front door

13/2/2005

- Remove locking knob upward - arrow - .

Installing

Left front and right rear door

- Attach locking knob onto locking rod with marking -small
point on top side- toward vehicle interior side.

- Press locking knob onto locking rod only as far until
corrugation is at height of door trim.

- Then screw locking knob 180 to right.

When locked, locking knob can be approx. 02 mm over
door trim.

Door seals

Front door

13/2/2005