Volkswagen Golf / Golf GTI / Jetta. Manual — part 905
01-396
- Press button -1- for "Rapid data
transfer" mode.
Rapid data transfer
HELP
Enter address word XX
Indicated on display:
Address word for the seat
adjustment: 36
Rapid data transfer
HELP
Enter address word XX
Indicated on display:
- Press buttons -3- and -6-.
Rapid data transfer
Q
36 Seat adjustment
Indicated on display after entering
the address word 36:
and then the following appears in the
display:
- Confirm entry with the -Q- button.
Rapid data transfer
Tester sends the address word 36
Indicated on display:
3B1959760XXSeat adjustmentFS 0001
The control module identification will
be shown on the V.A.G 1551 scan
tool display, e.g.:
- Press
button.
Rapid data transfer
HELP
Select function XX
Indicated on display:
Driver's side seat adjustment, On Board Diagnostic (OBD)
13/2/2005
01-397
Selectable functions, overview
page
01 - Check Control Module
Version
Page 01-398
02 - Check DTC Memory
Page 01-401
05 - Erase DTC memory
Page 01-404
06 - End Output
Page 01-406
08 - Read Measuring Value
Block
Page 01-423
Note:
A list of possible functions is printed out after
pressing the HELP button.
Do not select further functions, which can be
printed out after pressing the HELP button.
After the function is completed the V.A.G 1551
returns to the following start position:
Rapid data transfer
HELP
Select function XX
Indicated on display:
Driver's side seat adjustment, On Board Diagnostic (OBD)
13/2/2005
01-398
Check Control Module Version
- Connecting scan tool
Page 01-3
, initiating On
Board Diagnostic (OBD)
Page 01-395
.
- Switch on ignition.
- Press button -1- for "Rapid data transfer"
mode.
- Switch on printer with Print button (warning lamp
in button lights up).
- Press buttons -0- and -1-.
Rapid data transfer
Q
01-Check Control Module Version
Indicated on display:
- Confirm entry with the -Q- button.
3B1959760XXSeat adjustmentFS 0001
The control module identification will be shown on
the V.A.G 1551 scan tool display, e.g.:
Driver's side seat adjustment, On Board Diagnostic (OBD)
13/2/2005
01-399
Breakdown of the display:
Part No. of control module, System designation
(XX seat adjustment DS 0001)
- Press
button.
Rapid data transfer
HELP
Select function XX
Indicated on display:
Note:
Rapid data transfer
HELP
control module does not answer!
If one of the malfunction messages opposite
appears in the display, the possible causes of
the malfunction can be printed out with the
HELP button.
Rapid data transfer
HELP
K wire not switching to B+!
Ignition must be switched on.
Rapid data transfer
No signal from control module!
Malfunctions have occurred at the start of or
during the program (external interference?).
Rapid data transfer
Fault in communication build up
Check diagnosis wires as well as voltage
supply and Ground connection.
Driver's side seat adjustment, On Board Diagnostic (OBD)
13/2/2005
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст