Volkswagen Golf / Golf GTI / Jetta. Manual — part 701
Plenum chamber cover must not be pried off using a tool
(screwdriver, wedge). Window will be damaged and may
crack later.
- Lift plenum chamber cover - 1 - at windshield edge.
Flush-bonded windows
13/2/2005
- Now pull out plenum chamber cover - 1 - starting from
windshield edge at right angle out of mounting slit at lower
edge of windshield - 2 - .
Installing
Note:
Striking plenum chamber cover can cause cracks in
windshield.
Flush-bonded windows
13/2/2005
- To ease installation of plenum chamber cover in mounting
slots - 1 - , area should be sprayed with a soapy solution.
- Press plenum chamber cover - 1 - in mounting slots,
starting from center in direction of - arrow - .
Windshield, removing
- Remove A-pillar trim
Repair Manual, Body Interior, Repair Group 70, Pillar
and side trim
Flush-bonded windows
13/2/2005
.
- Unhook sun visor - 1 - out of mount - 2 - .
- Pry off cap - 6 - .
- Remove bolt - 5 - .
- Remove sun visor mount - 4 - from mounting and
disconnect connector - 3 - .
- Pry off cap - 7 - .
- Remove bolts - 8 - and remove mounts - 2 - .
- Pull rearview mirror - 1 - down at an angle - arrow - to
release from retaining plate (retaining springs in base of
mirror).
Flush-bonded windows
13/2/2005
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст