Volkswagen Golf / Golf GTI / Jetta. Manual — part 699
Installing
Installation is performed in the reverse
order of removal.
Adapter part (Golf R32), removing and
installing
Removing
- Removing bumper cover (Golf R32)
63-2, Rear bumper cover (Golf R32),
removing and installing
.
- Remove bolts - 2 - .
- Remove adapter part - 3 - .
Installing
Installation is performed in the reverse
Rear bumper
13/2/2005
order of removal.
Rear bumper carrier (Golf R32), assembly
overview
Note :
Slight changes may have to be made to
removal and installation procedures,
depending upon equipment installed in
vehicle.
1. Bumper carrier
2. Attachment rail
3. Guide piece
¡
To remove and install, pull out/slide
in bumper cover parallel out of
guide pieces (left and right sides)
Rear bumper
13/2/2005
4. Bolt
¡
Qty. 3
¡
1.5 Nm
5. Expanding nut
¡
Qty. 3
6. Internally threaded pop rivet
¡
Qty. 2
7. Bolt
¡
Qty. 2
¡
6.6 Nm
8. Expanding nut
¡
Qty. 4
9. Bolt
¡
Qty. 4
¡
1.5 Nm
10. Bolt
¡
Qty. 4
¡
20 Nm
Rear bumper
13/2/2005
64 - 1
Flush-bonded windows
Tools
Special tools, testers and auxiliary items
required
Cutting tool kit V.A.G1474A
Suction lifter V.A.G1344
Cutting tools for glass V.A.G1351
Window removing kit V.A.G1755
Cartridge gun V.A.G 1628
Cartridge heater V.A.G1939
Flush-bonded windows
13/2/2005
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст