Volkswagen Golf / Golf GTI / Jetta. Manual — part 772
- Insert steel clip - 1 - in C-pillar trim - 2 -
in direction of - arrow - .
Note:
n
upper section of trim panel must be
fixed with steel clip - 5 - , until it
engages audibly.
n
Before installing trim, check clips - 4
- for damage and replace if
necessary.
n
Avoid damage due to striking!
- Clip trim - 1 - to C-pillar.
Pillar and side trim
13/2/2005
- Bolt belt relay - 3 - with bolt - 2 - (40 Nm)
to C-pillar.
Upper C-pillar trim, assembly overview (Golf
wagon/Jetta wagon with side curtain
protection 05.01 )
Pillar and side trim
13/2/2005
1. Cover cap
2. Bolt
¡
40 Nm
3. Belt relay
4. Emblem, airbag
5. Bolt
¡
2 Nm
6. Upper C-pillar trim
¡
Removing
70-3, Upper C-
pillar trim, removing and
installing (Golf wagon/Jetta
wagon with side curtain
protection 05.01 )
Pillar and side trim
13/2/2005
7. Clips
8. Clip
Upper C-pillar trim, removing and installing
(Golf wagon/Jetta wagon with side curtain
protection 05.01 )
Note:
n
Removal and installation is described for right side of
vehicle. same instructions apply for removal and
installation for left-hand side.
Removing
- Pry off cap - 1 - .
- Remove bolt - 2 - (40 Nm) and remove
belt relay - 3 - .
- Unclip emblem, airbag - 4 - using a small
screwdriver.
- Remove bolt - 5 - (2 Nm).
Pillar and side trim
13/2/2005
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст