Volkswagen Golf / Golf GTI / Jetta. Manual — part 771
wagon/Jetta wagon with side curtain
protection 04.01)
1. Cover cap
2. Bolt
¡
40 Nm
3. Belt relay
4. Upper C-pillar trim
¡
Removing
70-3, Upper C-
pillar trim, removing and
installing (Golf wagon/Jetta
wagon with side curtain
protection 04.01)
5. C-pillar
Pillar and side trim
13/2/2005
6. Securing clip
7. Steel clip
8. Molded headliner
Upper C-pillar trim, removing and installing
(Golf wagon/Jetta wagon with side curtain
protection 04.01)
Note:
n
Removal and installation is described for right side of
vehicle. same instructions apply for removal and
installation for left-hand side.
Removing
- Remove cap - 1 - .
- Remove bolt - 2 - (40 Nm) and remove
belt relay - 3 - .
- Loosen C-pillar trim - 4 - in lower area -
arrowA - .
Pillar and side trim
13/2/2005
- Pull C-pillar trim - 4 - downward - arrow
B - .
- Position standard needle-nose pliers at
side between C-pillar - 1 - and steel clip -
2 - .
- Disengage locking mechanism of steel
clip - 2 - by pushing toger using needle-
nose pliers - arrows - .
- Remove steel clip - 2 - from C-pillar - 1 -
.
Note:
n
It is not possible to remove steel clip
- 2 - without destroying it.
Pillar and side trim
13/2/2005
Installing
Note:
n
For safety reasons, steel clip - 1 -
must be replaced after each removal
and installation of C-pillar trim - 2 - .
n
Steel clips and upper C-pillar trim
parts can no longer be ordered
separately for vehicles with side
curtain protection
⇒ parts catalog.
Pillar and side trim
13/2/2005
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст