Volkswagen Golf / Golf GTI / Jetta. Manual — part 770
- Slide steel clip - 1 - up to second detent -
4 - - arrowB - .
Note:
n
upper section of trim panel must be
fixed with steel clip - 4 - , until it
engages audibly.
n
Before installing trim, check both
clips - 3 - for damage and replace if
necessary.
- Clip trim - 1 - to C-pillar - 2 - .
- Insert door seal.
Pillar and side trim
13/2/2005
- Install rear shelf
70-3, Rear shelf,
removing and installing
.
Upper C-pillar trim, assembly overview
(Jetta without side curtain protection)
Pillar and side trim
13/2/2005
1. Belt relay
2. Belt relay cover cap
3. Bolt
¡
40 Nm
4. Washer
5. Spacer
Upper C-pillar trim, removing and installing
(Jetta without side curtain protection)
Note:
n
Removal and installation is described for right side of
vehicle. same instructions apply for removal and
installation for left-hand side.
Pillar and side trim
13/2/2005
Removing
- Remove rear shelf
70-3, Rear shelf, removing and
installing
.
- Remove seal in area of trim.
- Remove cover cap - 2 - and remove bolt
- 3 - (40 Nm).
- Remove belt relay - 1 - , washer - 4 -
and spacer - 5 - .
- Remove trim from C-pillar.
Installing
- Installation is reverse of removal.
Upper C-pillar trim, assembly overview (Golf
Pillar and side trim
13/2/2005
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст