Volkswagen Golf / Golf GTI / Jetta. Manual — part 697
mounting strip - 4 - .
- Remove impact strip - 6 - if necessary
Installing
Installation is performed in reverse order
of removal.
Rear bumper carrier, assembly overview
Note:
Slight changes may have to be made to removal and
installation procedures, depending upon equipment
installed in vehicle.
1. Bumper carrier
2. Impact absorber, left
Rear bumper
13/2/2005
3. Screw
¡
Qty. 4
¡
1.5 Nm
4. Mounting strip
5. Guide piece
¡
To remove and install, pull out/slide
in bumper cover parallel out of
guide pieces (left and right sides)
6. Screw
¡
Qty. 10
¡
1.5 Nm
7. Expanding nut
¡
Qty.10
8. Internally threaded pop rivet
¡
Qty. 2
9. Expanding nut
¡
Qty. 4
10. Bolt
¡
Qty. 2
¡
6.6 Nm
11. Impact absorber, right
12. Bolt
¡
Qty. 4
¡
20 Nm
13. Nut
¡
Qty. 2
Rear bumper
13/2/2005
¡
50 Nm
14. Bolt
¡
Qty. 2
¡
Only tighten
Trailer hitch, assembly overview
1. Trailer hitch
¡
for Front Wheel Drive (FWD)
vehicles
¡
for 4Motion vehicles
¡
Allocation
Original parts
distributor
Rear bumper
13/2/2005
¡
Removing and installing
63-2,
Trailer hitch, removing and installing
2. Bolt
¡
Qty. 4
¡
60 Nm +
1
/
4
turns (90 ) turn
¡
Always replace bolts after loosening
3. Power outlet
4. Bolt
¡
Qty. 3
¡
2.5 Nm
5. Bumper cover
¡
Material - PP/EPDM
¡
Removing and installing
63-2,
Rear bumper cover, removing and
installing
6. Ball head stud
¡
Removable
- Removing and installing
operating instructions
Trailer hitch, removing and installing
Rear bumper
13/2/2005
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст