Volkswagen Golf / Golf GTI / Jetta. Manual — part 698
Removing
- Removing ball head stud - 6 -
operating instructions .
- Remove rear wheelhousing liner
66-
1, Rear wheelhousing liner
.
- Remove bumper cover - 5 -
63-2,
Rear bumper cover, removing and
installing
.
- Remove power outlet - 3 - from trailer
hitch - 1 - .
- Remove bolts - 2 - .
- Remove trailer hitch - 1 - out of
mounting profile in body.
Installing
Installation is performed in reverse order
Rear bumper
13/2/2005
of removal. Note following:
- Only use new bolts - 2 - to secure trailer
hitch - 1 - .
Rear bumper cover (Golf R32), assembly
overview
Note :
Slight changes may have to be made to
removal and installation procedures,
depending upon equipment installed in
vehicle.
1. Bumper cover
¡
Material - PP/EPDM
¡
Removing
63-2, Rear bumper
cover, removing and installing
Rear bumper
13/2/2005
2. Bolt
¡
Qty. 6
¡
1.5 Nm
3. Bolt
¡
Qty. 4
¡
6.6 Nm
4. Expanding rivet
¡
Qty. 2
5. Adapter part
¡
Removal of adapter part only
possible with bumper cover
removed
63-2, Rear bumper
cover (Golf R32), removing and
installing
¡
Removing and installing
63-2,
Adapter part (Golf R32), removing
and installing
6. Bolt
¡
Qty.2
¡
1.5 Nm
Rear bumper cover (Golf R32), removing
and installing
Rear bumper
13/2/2005
Removing
- Loosen bumper cover - 1 - in area of
wheelhousing (bolts - 2 - and - 6 - ).
- Removing tail light assembly
.
Repair Manual, Electrical Equipment,
Repair Group 94, Tail light assembly
- Disconnect harness connector (below
left tail light assembly) for license plate
light - only Golf.
- Remove bolts - 3 - .
- Remove expanding rivet - 4 - .
- Remove bumper cover - 1 - .
Rear bumper
13/2/2005
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст