Volkswagen Golf / Golf GTI / Jetta. Manual — part 280
34-34
Vehicles with 4-Cyl. engines
- Remove ground strap at
engine/transmission upper
securing bolt.
- Remove engine/transmission
upper securing bolts.
- Remove hoses and cable
connections in area of engine
mounting eye for support 10-
222A.
- Install support bar 10-222A
together with legs 10-222 A/1,
special hook 10-222 A/2 and
adapter 10-222 A/3.
Transmission, removing and installing
34-35
Vehicles with 6-Cyl. engines
Continued for all vehicles
- Install support bar 10-222A
together with legs 10-222 A/1,
special hook 10-222 A/2 and
adapter 10-222 A/3.
- Take weight of
engine/transmission assembly on
spindles.
- Turn wheels fully onto left lock.
- Raise vehicle
- Remove sound insulation tray
(arrows).
Transmission, removing and installing
34-36
Vehicles with Diesel and 1.8 ltr.
Turbo engines
Continued for all vehicles
Repair Manual, Engine
Mechanical, Repair Group 26
- Remove left sound insulation
(arrows).
- Remove charge air line between
charge air cooler and
turbocharger.
- Remove right sound insulation.
- Disconnect axle shafts from
flanged shafts and tie up as high
as possible. When tying up shafts
do not damage body surface
protection.
- Separate exhuast system and if
necessary remove from
subframe.
Repair Manual, Electrical
Equipment, Repair Group 27; Starter
motor, removing and installing
- Remove pendulum support
(arrows -A- and -B-).
- Remove power steering line from
starter and transmission.
- Remove starter.
Transmission, removing and installing
34-37
- Unbolt engine side of assembly
mounting from engine carrier from
above (arrows).
- Remove left assembly mounting -
2- hex bolts (arrows) from left
mount -1-.
- Carefully tilt engine and
transmission by lowering left side
spindle approx. 60 mm on support
bar 10-222 A.
Transmission, removing and installing
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст