Volkswagen Golf / Golf GTI / Jetta. Manual — part 1059
01-144
VAG 1551 print
out
Possible cause
Possible effects
Corrective action
01315
Transmission
Control Module
(TCM)
No
communication
Data reception from
Transmission
Control Module
(TCM) via CAN Bus
is not OK.
Functions of
systems
connected to
CAN-Bus not
OK
- Read measuring
value block
Page
01-151
- Check DTC
memory of
Transmission Control
Module (TCM) and
repair malfunction if
necessary
- Check for open or
short circuit in CAN
Bus wiring using
wiring diagram.
01316
Brake control
module
No
communication
Data reception from
ABS control module
via CAN Bus not
OK
Functions of
systems
connected to
CAN-Bus not
OK
- Read measuring
value block
Page
01-151
- Check DTC
memory of ABS
control module and
repair malfunction if
necessary
- Check for open or
short circuit in CAN
Bus wiring using
wiring diagram.
Data Bus On Board Diagnostic Interface -J533- ('Gateway') m.y. 2000 through m.y.
13/2/2005
01-145
VAG 1551 print
out
Possible cause
Possible effects
Corrective
action
01317
Control module
with indicator
module in
instrument cluster
insert -J285-
No communication
Malfunction in
data wires
Control module
malfunctioning
No indication or
malfunctioning
indication for
indicator
instruments and
control lamps
- Check DTC
memory of all
control modules
connected to
CAN Bus and
repair
malfunction if
necessary
- Check for open
or short circuit in
CAN Bus wiring
using wiring
diagram.
01321
Airbag Control
Module-
-J234-
No communication
Data reception by
airbag control
module control
module via CAN
Bus not OK
Airbag indicator
lamp is lit
- Read
measuring value
block
Page
01-151
- Check DTC
memory of
airbag control
module and
eliminate
malfunction if
necessary
- Check for open
or short circuit in
CAN Bus wiring
using wiring
diagram.
Data Bus On Board Diagnostic Interface -J533- ('Gateway') m.y. 2000 through m...
13/2/2005
01-146
Diagnostic Trouble Code
(DTC) memory, erasing
(function 05)
Note:
After DTC memory is erased, its
contents are automatically output. If
DTC memory cannot be erased,
check DTC memory again and repair
malfunction.
Prerequisites
DTC memory checked
Page
01-140
.
All malfunctions repaired.
After successful DTC memory
check:
Rapid data transfer
HELP
Select function XX
Indicated on display:
- Press buttons -0- and -5- to select
"Erase DTC memory" function 05.
Rapid data transfer
Q
05 Erase DTC memory
Indicated on display:
- Press -Q- button to confirm input.
Rapid data transfer
DTC memory is erased!
Indicated on display:
DTC memory is erased.
- Press
button.
Rapid data transfer
HELP
Select function XX
Indicated on display:
Data Bus On Board Diagnostic Interface -J533- ('Gateway') m.y. 2000 through m...
13/2/2005
01-147
Notes:
WARNING!
DTC memory was not checked
If this appears in the display, the
test sequence is faulty.
Rapid data transfer
DTC memory was not checked
If this appears in the display, the
test sequence is faulty.
Follow test sequence exactly:
first check DTC memory, repair
malfunction(s) if necessary, then
erase.
Data Bus On Board Diagnostic Interface -J533- ('Gateway') m.y. 2000 through m...
13/2/2005
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст