Volkswagen Golf / Golf GTI / Jetta. Manual — part 231
24-178
Work sequence
- Connect VAG 1551 Scan tool (or VAG 1552).
Then switch ignition on and select Motronic
Engine Control Module (ECM) -J220- with
"Address word" 01. ((VAG 1551 and Motronic
Engine Control Module (ECM) -J220-,
connecting and selecting
Page 01-12
).
Rapid data transfer
HELP
Select function XX
Indicated on display:
- Press buttons -0- and -7- for the function "Code
control module" and confirm entry with -Q-
button.
Code control module
Enter code number XXXXX
(0-32000)
Indicated on display:
Motronic Engine Control Module (ECM) -J220-
24-179
- Enter relevant code number fo vehicle and
confirm with -Q- button.
Coding variations of Motronic Engine Control
Module (ECM) -J220-
Page 24-181
.
022906032BL MOTRONIC ME7.1.1 G 0006
Coding 00032
WSC 00000
The control module identification and coding are
shown on the display, e.g.:
- Press
button.
- Press buttons -0- and -6- for function "End
output" and confirm entry with -Q- button.
- Switch off ignition.
- Check DTC memory, repair malfunctions if
necessary and then erase DTC memory
Page
01-23
.
- Read readiness code
Page 01-146
. If DTC
memory has been erased or Motronic Engine
Control Module (ECM) -J220- was disconnected
from battery positive (B+), readiness code must
be generated again
Page 01-149
.
Function is not recognized or cannot
be performed at the moment.
Indicated on display when a non-authorized code
number has been entered.
Motronic Engine Control Module (ECM) -J220-
24-180
Note:
The code entered, and shown on the display, will
not be used by the Motronic control module until
the ignition has been switched off once. An
incorrect coding leads to:
Engine running Diagnostic Trouble Code (DTC)
s (gear change jolts, load change jerks, etc.)
Increased fuel consumption
Increased exhaust gas emissions
Diagnostic Trouble Code (DTC)s stored in DTC
memory which are not actually present (false
DTCs)
Functions will not be performed (Oxygen
Sensor control, activation of the Evaporative
Emissions (EVAP) Canister Purge system,
etc.).
Reduced service life of transmission
Motronic Engine Control Module (ECM) -J220-
24-181
Motronic Engine Control Module (ECM) -J220-, coding variations
1. position:
vehicle
code
2. position:
emissions
code
3. position:
sensor
code
4. position:
CAN-bus
5. position:
transmission code
0
=
No
coding
0
=
No
coding
0
=
No
coding
0
=
No coding 0
=
No coding
1
=
---
1
=
---
1
=
---
1
=
ABS
1
=
5-speed man.
transmission
2
=
---
2
=
---
2
=
---
2
=
Airbag
2
=
6-speed man.
transmission
3
=
---
3
=
---
3
=
---
3
=
ABS and
airbag
3
=
Autom.
transmission
4
=
---
4
=
---
4
=
---
4
=
---
4
=
---
5
=
---
5
=
---
5
=
---
5
=
---
5
=
---
Note:
The code number is compiled as shown in the following example:
1. position: Vehicle code (no code at present)
0
2. position: Emissions code (no code at present)
0
3. position: sensor code (no code at present)
0
4. position: CAN-bus code (ABS and airbag)
3
5: position: transmission code (6-speed manual transmission)
2
Code number:
0 0 0 3 2
Motronic Engine Control Module (ECM) -J220-
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст