Volkswagen Golf / Golf GTI / Jetta. Manual — part 1089
27-95
Repair
Manual,
Heating & Air
Conditioning,
Repair Group
87
10
-
Voltage
Regulator
(VR)
Removing
and
installing
Page
27-78
Checking
carbon
brushes
Page
27-79
11
-
Protective
cap
12
-
Generator
(GEN)
Tightening
torque B+
wire to
generator
Page
27-77
To remove
generator,
first remove
A/C
compressor
(without
opening
refrigerant
circuit)
13 - Ribbed
belt
Removing
and
installing
Page
27-96
.
Generator (GEN) - 6-cylinder gasoline engines
13/2/2005
Ribbed
belt
routing
Page
27-100
14 - Hex
bolts
M8 x
85mm
25 Nm
15 - Hex
socket
bolts
M8 x
30mm
25 Nm
16
-
Tensioner
Generator (GEN) - 6-cylinder gasoline engines
13/2/2005
27-96
Ribbed belt, removing and installing
CAUTION!
Before removing ribbed belt, mark direction
of rotation. Belt damage will result if not
reinstalled in proper direction.
Check ribbed belt
Page 27-81
. Always
replace ribbed belt if found to be faulty. This
will avoid related failures or operating
problems.
Special tools and auxiliary items needed
Bolt - M8 X 50
Removing 2.8L - 2V
Note:
Engine cover on USA/CDN 2.8L - 2V is similar to
European market 2.3L engine illustrated here.
- Release screw(s) -arrow-.
- Lift engine covers -A- and -B- where applicable
from engine.
Generator (GEN) - 6-cylinder gasoline engines
13/2/2005
27-97
Removing 2.8L & 3.2L - 4V
Continued for all
- Unclip and lift engine cover -1-
from engine.
- Lift vehicle.
- Remove bolts -arrows- and
remove center sound insulation.
Generator (GEN) - 6-cylinder gasoline engines
13/2/2005
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст