Volkswagen Golf / Golf GTI / Golf Variant. Manual — part 329
Removing
– Remove the bolts -2-.
– Remove the wheel housing liner -1- from the fender.
Installing
Note
Check the expanding nuts for damage and replace them if necessary.
– Push the front wheel housing liner -1- into the fender.
– Align the front wheel housing liner -1- with the front bumper
cover.
– Install the bolts -2- and tighten them.
Tightening Specifications
8.5
Rear Wheel Housing Liner, Removing
and Installing
Special tools and workshop equipment required
♦ Torque Wrench 1783 - 2-10Nm - VAG1783-
Note
♦
The following describes the removal and installation of the left rear wheel housing liner. The right side is
identical.
♦
Depending on the model version, slight differences must be considered when removing and installing.
Removing
– Remove the wheel. Refer to ⇒ Suspension, Wheels, Steering;
Rep. Gr. 44 ; Wheels and Tires; Wheel Bolt Tightening Spec‐
ifications .
– Remove the bolts -2-.
– Remove the rear wheel housing liner -1- from the wheel hous‐
ing.
Sill panel cover, removing and installing. Refer to
.
Installing
Note
Check the expanding nuts for damage and replace them if necessary -item 4-
– Install the rear wheel housing liner -1- in the wheel housing
without bending it.
– Install the bolts -2- and tighten them.
– Install the wheel. Refer to ⇒ Suspension, Wheels, Steering;
Rep. Gr. 44 ; Wheels and Tires; Wheel Bolt Tightening Spec‐
ifications .
Tightening Specifications
9
Name Badges and Emblems
⇒ “9.1 Dimensions - Rear Lid Name Badge and Emblem”,
page 451
⇒ “9.2 Dimensions - Fender Name Badges and Emblems”, page
454
⇒ “9.3 Front Emblems, Removing and Installing”, page 454
⇒ “9.4 Rear Emblem, Removing and Installing”, page 456
⇒ “9.5 Name Badges, Removing and Installing”, page 457
9.1
Dimensions - Rear Lid Name Badge and
Emblem
⇒ “9.1.1 Dimensions - Name Badge on the Rear Lid, except GTI”,
page 451
⇒ “9.1.2 Dimensions - Name Badge on the Rear Lid, GTI”,
9.1.1
Dimensions - Name Badge on the Rear Lid, except GTI
Note
Follow the assembly instructions when installing the name badges. Refer to
.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст