Volkswagen Golf / Golf GTI / Golf Variant. Manual — part 613
❑ Removing and installing. Refer to
⇒ “2.4.2 Wiring Harness, Removing and Installing, Sensors”, page 100
.
❑ Allocation. Refer to the Parts Catalog.
6 - Transmission Fluid Temperature Sensor - G93-
❑ Component location. Refer to
⇒ Fig. ““Sensor Wiring Harness”“ , page 10
❑ Can be checked in “Guided Fault Finding” using Vehicle Diagnostic Tester .
7 - Solenoid Valve Wiring Harness
❑ Wiring harness, 14-pin
❑ Component location. Refer to
⇒ Fig. ““Solenoid Valve Wiring Harness”“ , page 11
❑ Removing and installing. Refer to
⇒ “2.4.1 Wiring Harness, Removing and Installing, Solenoid Valves”, page 99
❑ Allocation. Refer to the Parts Catalog.
8 - Shift Lock Solenoid - N110-
❑ Component location: The shift lock solenoid is located in selector mechanism.
❑ Can be checked in “Guided Fault Finding” using Vehicle Diagnostic Tester .
9 - Selector Mechanism
❑ With the Tiptronic Switch - F189-
❑ The Tiptronic Switch - F189- is a component of the selector mechanism.
❑ Replace the selector mechanism if faulty. Refer to
⇒ “2.2 Selector Mechanism, Removing and Installing”, page 21
❑ Can be checked in “Guided Fault Finding” using Vehicle Diagnostic Tester .
10 - Transmission Input Speed Sensor - G182-
❑ Component location. Refer to
⇒ Fig. ““ Transmission Input Speed Sensor -G182- and Transmission Output Speed Sensor -G195- ”“ ,
❑ Removing and installing. Refer to
⇒ “2.5 Transmission Input Speed Sensor G182 , Removing and Installing”, page 101
.
❑ Can be checked in “Guided Fault Finding” using Vehicle Diagnostic Tester .
11 - Transmission Output Speed Sensor - G195-
❑ Component location. Refer to
⇒ Fig. ““ Transmission Input Speed Sensor -G182- and Transmission Output Speed Sensor -G195- ”“ ,
❑ Removing and installing. Refer to
⇒ “2.6 Transmission Output Speed Sensor G195 , Removing and Installing”, page 101
❑ Can be checked in “Guided Fault Finding” using Vehicle Diagnostic Tester .
12 - Data Link Connector (DLC)
❑ Component location. Refer to
⇒ Fig. ““Data Link Connector (DLC)”“ , page 11
13 - Transmission Range Display - Y6-
❑ Component location. Refer to
⇒ Fig. ““ Transmission Range Display -Y6- ”“ , page 11
❑ Removing and installing. Refer to ⇒ Electrical Equipment; Rep. Gr. 90 ; Instrument Cluster; Overview
- Instrument Cluster .
Transmission Control Module - J217- -arrow-
Component location: The control module is located in front left
wheel housing.
– The wheel housing liner must be removed for removal and in‐
stallation.
Multifunction Transmission Range Switch - F125-
Component location: The multi-function switch is located on up‐
per side of transmission.
Valve Body
Component location: Valve body is bolted to underside of trans‐
mission housing and is covered by transmission fluid pan.
The Solenoid Valve 1 - N88- , -N89- , -N90- , -N91- , -N92- , -
N93- , -N282- and -N283- are secured on the valve body.
Sensor Wiring Harness
♦ 8-pin wiring harness
♦ With integrated Transmission Fluid Temperature Sensor -
G93- -arrow-.
Component location: The wiring harness is secured to valve body
in the transmission.
Solenoid Valve Wiring Harness
♦ Wiring harness, 14-pin
Component location: The wiring harness is secured to valve body
in the transmission.
Transmission Input Speed Sensor - G182- and Transmission
Output Speed Sensor - G195-
Component location: Inside the transmission housing above the
valve body.
1 - Transmission Input Speed Sensor - G182-
2 - Transmission Output Speed Sensor - G195-
Data Link Connector (DLC)
Component location: The DLC -arrow- is located under the driver
side storage compartment on the left side.
Transmission Range Display - Y6-
Component location: inside the instrument cluster
6
Special Tools
Special tools and workshop equipment required
♦ Torque Wrench 1783 - 2-10Nm - VAG1783-
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст