Volkswagen Golf / Golf GTI / Golf Variant. Manual — part 547
8 - Blower Speed Display
9 - Temperature Control Knob
❑ To the left: lower the temperature
❑ To the right: increases the temperature
10 - Temperature Setting Display
5.2
Display and Control Head, Removing
and Installing
The removal and installation is identical to vehicles with an Air
Conditioning (A/C) system. Refer to
⇒ “6.2 Display and Control Head, Removing and Installing”, page
6
Additional Components for Control
and Regulation
⇒ “6.1 Outside Air Temperature Sensor G17 , Removing and
6.1
Outside Air Temperature Sensor -
G17- , Removing and Installing
The removal and installation is identical to vehicles with an Air
Conditioning (A/C) system. Refer to
⇒ “8.4 Outside Air Temperature Sensor G17 , Removing and
.
87 – Air Conditioning
1
Component Location Overview - A/C
System
⇒ “1.1 Component Location Overview - Components Outside of
Passenger Compartment”, page 26
⇒ “1.2 Component Location Overview - Components Inside Front
Passenger Compartment”, page 29
1.1
Component Location Overview - Components Outside of Passenger Com‐
partment
1 - Vehicle Interior Forced Air
Extraction
❑ Check using the Vehicle
Diagnostic Tester . Re‐
fer to
❑ Removing and instal‐
ling. Refer to
.
2 - A/C Humidity Sensor -
G260-
❑ Checking: via the Vehi‐
cle Electrical System
Control Module - J519-
using the Vehicle Diag‐
nostic Tester in the “Gui‐
ded Fault Finding” func‐
tion. Refer to ⇒ Wiring
diagrams, Trouble‐
shooting & Component
locations.
❑ Removing and instal‐
ling. Refer to
.
3 - Expansion Valve
❑ Removing and instal‐
ling. Refer to
Removing and Installing”, page 37
❑ Tightening Specifications. Refer to
⇒ “2.1 System Overview - Refrigerant Circuit”, page 32
.
4 - Dryer Bag
❑ Removing and installing. Refer to
⇒ “2.6 Dryer Bag, Removing and Installing”, page 42
❑ Overview. Refer to
⇒ “2.2 Overview - Condenser”, page 35
.
5 - Outside Air Temperature Sensor - G17-
❑ Checking: via the Vehicle Electrical System Control Module - J519- using the Vehicle Diagnostic Tester
in the “Guided Fault Finding” function. Refer to ⇒ Wiring diagrams, Troubleshooting & Component loca‐
tions.
❑ Removing and installing. Refer to
⇒ “8.4 Outside Air Temperature Sensor G17 , Removing and Installing”, page 153
6 - Condenser
❑ With integrated receiver/dryer
❑ Overview. Refer to
⇒ “2.2 Overview - Condenser”, page 35
❑ Removing and installing. Refer to
⇒ “2.5 Condenser, Removing and Installing”, page 40
.
Note
Under certain conditions, the receiv‐
er/dryer and the dryer bag does not
need to be replaced each time the
refrigerant circuit is opened. Refer to
⇒ Refrigerant R134a Servicing;
Rep. Gr. 00 ; A/C System, General
Information .
7 - A/C Compressor
⇒ “3.1 Overview - A/C Compressor Power Unit”, page 57
❑ Removing and installing. Refer to
⇒ “3.4 A/C Compressor, Removing and Installing”, page 63
❑ Removing from and attaching to the bracket. Refer to
⇒ “3.3 A/C Compressor, Removing and Installing on Bracket”, page 61
.
8 - Evacuating and Charging Valve, High Pressure Side
Caution
Danger due to refriger‐
ant coming out under
pressure when there is a
defective valve in the re‐
frigerant circuit.
Danger of frost bite to
skin and other parts of
the body.
♦
Only remove when the
refrigerant circuit is emp‐
ty. The connection does
not have a valve. Refer to
⇒ Refrigerant R134a
Servicing; Rep. Gr. 00 ;
A/C System, General In‐
formation .
❑ Removing and installing. Refer to
⇒ “2.9 Evacuating and Charging Valve, Removing and Installing, Low and High Pressure Side”,
.
9 - Refrigerant Circuit Pressure Sensor - G805-
❑ 8 Nm
❑ To check, use the Vehicle Diagnostic Tester in the “Guided Fault Finding” function. Refer to ⇒ Wiring
diagrams, Troubleshooting & Component locations.
❑ Removing and installing. Refer to
⇒ “2.3 Refrigerant Circuit Pressure Sensor G805 , Removing and Installing”, page 36
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст