Volkswagen Golf / Golf GTI / Golf Variant. Manual — part 267
12 - Bow
13 - Sunroof Shade
❑ Removing and installing. Refer to
⇒ “1.16.3 Sunroof Shade, Removing and Installing, Wagon”, page 292
.
14 - Tilting Mechanism
❑ For front glass panel, with control cables
15 - Supporting Bracket
16 - Tension Spring
17 - Wind Deflector
❑ Removing and installing. Refer to
⇒ “1.5.3 Wind Deflector, Removing and Installing, Wagon”, page 219
.
18 - Power Sunroof Control Module - J245-
❑ Removing and installing. Refer to
⇒ “1.13.3 Power Sunroof Control Module J245 , Removing and Installing, Wagon”, page 269
.
❑ Initialization. Refer to
⇒ “1.17 Power Sunroof Control Module J245 , Programming”, page 297
.
19 - Connectors
20 - Trim
21 - Bolt
❑ 7 Nm
❑ Quantity: 8
22 - Sunroof Panel
❑ Removing and installing. Refer to
⇒ “1.6.4 Glass Panel, Removing and Installing, Wagon”, page 233
❑ Adjusting. Refer to
⇒ “1.8.2 Glass Panel, Adjusting, Wagon”, page 243
23 - Outer Seal
❑ Removing and installing. Refer to
⇒ “1.15.3 Sunroof Frame Seal, Removing and Installing, Wagon”, page 276
.
1.3
Overview - Sunroof Shade
⇒ “1.3.1 Overview - Sunroof Shade, Sedan through 02/2015”,
page 201
⇒ “1.3.2 Overview - Sunroof Shade, Sedan from 03/2015”,
page 202
⇒ “1.3.3 Overview - Sunroof Shade, Wagon”, page 203
1.3.1
Overview - Sunroof Shade, Sedan through 02/2015
1 - Sunroof Shade
❑ Removing and instal‐
ling. Refer to
.
2 - Mount
❑ For the sunroof shade
fabric
3 - Screw
❑ 2 Nm
❑ Quantity: 2
4 - Tension Wire
❑ For attaching the mate‐
rial in the tension bow
5 - Drive Plate
6 - Slider
7 - Tension Bow
❑ Removing and instal‐
ling. Refer to
.
8 - Handle
9 - Screw
❑ 1 Nm
❑ For the handle
❑ Quantity: 2
10 - Slider
1.3.2
Overview - Sunroof Shade, Sedan from 03/2015
1 - O-Ring
❑ Quantity: 2
❑ Note the position
2 - Sunroof Shade
❑ With tension wire for at‐
taching the material to
the tension bow
❑ Removing and Instal‐
ling. Refer to
.
3 - Steel Band Carrier
❑ For the sunroof shade
fabric
4 - Slider Lower Section
❑ Attached to the steel
band carrier
5 - Slider Upper Section
6 - Bolt
❑ 2 Nm
❑ Quantity: 2
7 - Tension Bow
❑ Removing and Instal‐
ling. Refer to
8 - Clip
❑ Quantity: 1
9 - Handle
10 - Bolt
❑ 1 Nm
❑ For the handle
❑ Quantity: 2
11 - Stop Buffer
❑ For shade
1.3.3
Overview - Sunroof Shade, Wagon
1 - Sunroof Shade
❑ Removing and instal‐
ling. Refer to
.
2 - Mount
❑ For the sunroof shade
fabric
3 - Bolt
❑ 2 Nm
❑ Quantity: 2
4 - Drive Plate
5 - Tension Bow
6 - Sunroof Frame
❑ Removing and instal‐
ling. Refer to
.
1.4
Sunroof Frame, Removing and Instal‐
ling
⇒ “1.4.1 Sunroof Frame, Removing and Installing, Sedan”,
page 203
⇒ “1.4.2 Sunroof Frame, Removing and Installing, Wagon”, page
1.4.1
Sunroof Frame, Removing and Instal‐
ling, Sedan
Special tools and workshop equipment required
♦ Double Cartridge Gun - VAS5237-
♦ Window Cutter - VAG1561A-
♦ Blade, L-shaped, 19 mm - VAG 561/21-
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст