Volkswagen Golf / Golf GTI / Golf Variant. Manual — part 266
9 - Screw
❑ 2.5 Nm
❑ For the cover
❑ Quantity: 5
10 - Cover
❑ For the slotted guide rail
❑ Removing and Installing. Refer to
⇒ “1.13.1 Power Sunroof Control Module J245 , Removing and Installing, Sedan through 02/2015”, page
.
11 - Screw
❑ 3 Nm
❑ Replace after removing
❑ Microencapsulated
❑ Quantity: 13
12 - Slotted Guide Rail Guide
❑ With tilting mechanism and cables
❑ Forms one component with the mounting carrier, sun shade and control module
❑ Removing and installing. Refer to
⇒ “1.11 Slotted Guide Rail Guide, Removing and Installing”, page 246
13 - Wind Deflector
❑ Removing and installing. Refer to
⇒ “1.5 Wind Deflector, Removing and Installing”, page 215
14 - Screw
❑ 2 Nm
❑ For the wind deflector
❑ Quantity: 2
1.2.2
Overview - Sunroof, Sedan from 03/2015
1 - Panorama Tilting Sunroof
Glass Panel (One-Piece Safe‐
ty Glass)
❑ Glass Panel, Removing.
Refer to
❑ Glass Panel, Adjusting.
Refer to
2 - Sunroof Frame Seal
❑ Removing and Instal‐
ling. Refer to
.
3 - Sunroof Frame
❑ Sunroof Frame, Remov‐
ing and Installing. Refer
to
.
❑ If necessary, use only
Special Grease - G 060
751 A2- to grease the
guide channels, other‐
wise the function cannot
be guaranteed.
4 - Cover
❑ For the slotted guide rail
❑ Removing and Installing. Refer to
⇒ “1.13.2 Power Sunroof Control Module J245 , Removing and Installing, Sedan from 03/2015”,
.
5 - Bolt
❑ 2.5 Nm
❑ For the cover
❑ Quantity: 3
6 - Sunroof Shade
❑ Removing and Installing. Refer to
⇒ “1.16.2 Sunroof Shade, Removing and Installing, Sedan from 03/2015”, page 288
.
7 - Bolt
❑ 4 Nm
❑ For the sunroof motor
❑ Quantity: 3
8 - Power Sunroof Control Module - J245-
❑ Control Module, Removing and Installing. Refer to
⇒ “1.13.1 Power Sunroof Control Module J245 , Removing and Installing, Sedan through 02/2015”, page
❑ Control Module, Adapting. Refer to
⇒ “1.17 Power Sunroof Control Module J245 , Programming”, page 297
9 - Slotted Guide Rail Guide
❑ With tilting mechanism and cables
❑ Forms one component with the mounting carrier, sun shade and control module
❑ Removing and Installing. Refer to
⇒ “1.11 Slotted Guide Rail Guide, Removing and Installing”, page 246
10 - Bolt
❑ 3 Nm
❑ Micro-encapsulated
❑ Replace after removing
❑ Quantity: 24
11 - Rail
❑ Lifter component
❑ To secure the glass panel to the slotted guide rail guide
12 - Wind Deflector
❑ Removing and Installing. Refer to
⇒ “1.5.2 Wind Deflector, Removing and Installing, Sedan from 03/2015”, page 217
13 - Bolt
❑ 5.5 Nm
❑ Micro-encapsulated
❑ Replace after removing
❑ Quantity: 10
1.2.3
Overview - Sunroof, Wagon
1 - Rear Sunroof Panel
❑ Removing and instal‐
ling. Refer to
❑ Adjusting. Refer to
.
2 - Bolt
❑ 7 Nm
❑ Quantity: 6
3 - Seal
❑ For rear glass panel
❑ Removing and instal‐
ling. Refer to
.
4 - Wire
5 - Inner Seal
❑ Installed on the assem‐
bly frame
6 - Rear Lid Part
7 - Roof Shade Control Module
- J394-
❑ Removing and instal‐
ling. Refer to
.
⇒ “1.18 Roof Shade Control Module J394 , Programming”, page 298
8 - Bolt
❑ 4 Nm
❑ For securing the motors
❑ 3 per motor
9 - Bolt
❑ 8 Nm
❑ To secure the sunroof frame
❑ Quantity: 18
10 - Sunroof Frame
❑ Removing and installing. Refer to
⇒ “1.4.2 Sunroof Frame, Removing and Installing, Wagon”, page 212
.
11 - Cable
❑ For the sunroof shade
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст