Volkswagen Golf / Golf GTI / Golf Variant. Manual — part 244
– Remove the door handle -1- from the door.
– Gently push the lock cylinder cap -2- at an angle from above
in direction of -arrow a- onto the lock cylinder.
– Press the lock cylinder cap -2- onto the door in direction of
-arrow b- until the cap engages with the lock cylinder.
2.9
Cap without Lock Cylinder, Removing
and Installing
Special tools and workshop equipment required
♦ Lock Cylinder Housing Assembly Tool - T10389-
Note
This cap is installed where there is no lock cylinder.
Removing
– Remove the plugs -3-.
– Guide the Lock Cylinder Housing Assembly Tool - T10389-
approximately 44 mm behind the bracket locking hook -2-.
– Pull the Lock Cylinder Housing Assembly Tool - T10389- ap‐
proximately 5 mm toward the rear in direction of -arrow- until
the hook releases.
– Remove the door handle -2- from the door in direction of
-arrow a-.
– Remove the cap -1- from the bracket in direction of -arrow b-.
Installing
– Remove the door handle -2- from the door in the direction of
-arrow a-.
– Insert the cap -1- into the bracket in direction of -arrow b-.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст