Volkswagen Golf / Golf GTI / Golf Variant. Manual — part 280
Note
Do not twist or bend the guide rails with the slotted guide rail guide, because there is no brace installed in the
front area.
– Lower the slotted guide rail guide with guide rails -1- at the rear
-arrow a-.
– Remove the slotted guide rail guide with guide rails -1- from
the sunroof frame -2- -arrow b-.
Installing
Note
Do not twist or bend the guide rails with the slotted guide rail guide, because there is no brace installed in the
front area.
– Install the slotted guide rail guide with guide rails -1- parallel
to the sunroof frame -2- -arrow a-.
– Guide the slotted guide rail guide with the rear guide rails -1-
on the sunroof frame -arrow b-.
– Install all bolts -arrows- and tighten lightly.
– Align the slotted guide rail guide with the guide rails -1-.
– Tighten the bolts -arrows-.
Perform the rest of the installation in the reverse order of removal.
Tightening Specifications
1.12
Sunroof Front Trim, Removing and In‐
stalling
Special tools and workshop equipment required
♦ Cartridge Gun - VAG1628-
♦ Window Cutter - VAG1561A-
♦ Window Cutter - Saw Blade - 83mm - VAG1561/26-
Caution
A visual inspection when the sliding sunroof is open on the
vehicle is essential to order the correct replacement part. Refer
Materials
Note
For material part numbers. Refer to the Parts Catalog.
♦ One-part assembly adhesive
1)
2)
♦ Glass/Paint primer
1)
♦ Cleaning Solution
1)
♦ Applicator
1)
♦ Adhesive remover
1)
♦ Cutting Wire
1)
Follow the manufacturer instructions supplied in the packaging.
2)
Note the minimum curing time. Refer to
Removing
Note
♦
The front trim is destroyed when removed and cannot be reinstalled.
♦
Tape off the roof pillar and roof edge to protect the paint from damage.
– Starting at the distance -a- = 10 mm from the inner edge, apply
a mark over the entire length of the trim.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст