Volkswagen Golf / Golf GTI / Golf Variant. Manual — part 374
7.2
Overview - Rear Side Airbag
1 - Seat Pan
2 - Wire
❑ From Driver Side Rear
Thorax Airbag Igniter -
N201- / Passenger Side
Rear Thorax Airbag Ig‐
niter - N202-
WARNING
Observe the safety pre‐
cautions for pyrotechni‐
cal components. Refer to
.
3 - Screws
❑ 8 Nm
❑ Quantity: 2
4 - Rear Side Airbag
❑ Driver side: with Driver
Side Rear Thorax Air‐
bag Igniter - N201-
❑ Passenger side: with
Passenger Side Rear
Thorax Airbag Igniter -
N202-
❑ Removing and instal‐
ling. Refer to
5 - Airbag Pocket
7.3
Front Side Airbag with Igniter, Remov‐
ing and Installing
Removing
WARNING
♦ Observe the safety precautions for pyrotechnical compo‐
nents. Refer to
⇒ “1.2 Safety Precautions for Pyrotechnic Components”,
♦ Observe the additional safety precautions for the side air‐
bag. Refer to
⇒ “1.4 Additional Side Airbag Safety Precautions”,
♦ Observe the disposal regulations for pyrotechnical com‐
ponents. Refer to
⇒ “1.3 Airbag, Belt Tensioner and Battery Cut-Out Units,
Storing, Transporting and Disposing (Pyrotechnic Com‐
– Remove the front seat. Refer to
⇒ “2.10 Front Seat, Removing and Installing”, page 335
.
– Remove the front backrest. Refer to
⇒ “2.16 Front Backrest, Removing and Installing”, page 349
– Remove the cover and the backrest cushion. Refer to
⇒ “1.5 Backrest Cover and Cushion, Removing and Installing”,
.
– Remove the bolt -2-.
– Slide the side airbag -1- upward and remove it from the back‐
rest frame.
– Carefully loosen the wiring bracket of the side airbag wiring
harness -3- from the backrest.
Installing
Install in reverse order of removal while paying attention to the
following:
– Switch the ignition on.
WARNING
Make sure that no persons are in the vehicle.
– Connect the battery. Refer to ⇒ Electrical Equipment; Rep.
Gr. 27 ; Battery; Battery, Disconnecting and Connecting .
WARNING
If the ignition is not switched on after the battery is reconnected
- “indicator lamps in the instrument cluster do not light up” - the
ignition (key/button) may only be switched on when the driver
seat is positioned all the way back.
Tightening Specifications
♦ Refer to
7.4
Rear Side Airbag with Igniter, Removing
and Installing
Removing
WARNING
♦ Observe the safety precautions for pyrotechnical compo‐
nents. Refer to
⇒ “1.2 Safety Precautions for Pyrotechnic Components”,
.
♦ Observe the additional safety precautions for the side air‐
bag. Refer to
⇒ “1.4 Additional Side Airbag Safety Precautions”,
.
♦ Observe the disposal regulations for pyrotechnical com‐
ponents. Refer to
⇒ “1.3 Airbag, Belt Tensioner and Battery Cut-Out Units,
Storing, Transporting and Disposing (Pyrotechnic Com‐
.
– Remove the side cushion. Refer to
⇒ “3.16 Side Cushion, Removing and Installing”, page 391
– Remove the two screws -2-.
– Unclip the connector -1- from the seat pan.
– Remove the side airbag -3- from the airbag pocket -4-.
Installing
Install in reverse order of removal while paying attention to the
following:
– Switch the ignition on.
WARNING
Make sure that no persons are in the vehicle.
– Connect the battery. Refer to ⇒ Electrical Equipment; Rep.
Gr. 27 ; Battery; Battery, Disconnecting and Connecting .
WARNING
If the ignition is not switched on after the battery is reconnected
- “indicator lamps in the instrument cluster do not light up” - the
ignition (key/button) may only be switched on when the driver
seat is positioned all the way back.
Tightening Specifications
♦ Refer to
8
Head Curtain Airbags
8.1
Overview - Head Curtain Airbag
1 - Anti-Rotation Protection
Line
❑ Serves as anti-twist
mechanism
❑ Must be visible after as‐
sembly.
2 - Head Curtain Airbag
❑ Driver side: with Driver
Head Curtain Airbag Ig‐
niter - N251-
❑ Front passenger side:
with Front Passenger
Head Curtain Airbag Ig‐
niter - N252-
WARNING
Observe the safety pre‐
cautions for pyrotechni‐
cal components. Refer to
❑ Removing and instal‐
ling. Refer to
3 - Screw
❑ 4.5 Nm
❑ Replace after removing
4 - Clip
❑ Quantity: 5
5 - Clip
8.2
Head Curtain Airbag with Igniter, Re‐
moving and Installing
⇒ “8.2.1 Head Curtain Airbag with Igniter, Removing and Instal‐
ling, Sedan”, page 147
⇒ “8.2.2 Head Curtain Airbag with Igniter, Removing and Instal‐
8.2.1
Head Curtain Airbag with Igniter, Re‐
moving and Installing, Sedan
Special tools and workshop equipment required
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст