Volkswagen Golf / Golf GTI / Golf Variant. Manual — part 428
2.23
Headrest, Removing and Installing
Removing
Note
♦
The headrests can be removed with the front seats installed.
♦
The release button is located on the outer left of the driver seat and inner left of the passenger seat.
– Move the front seat forward into the lowest position and tilt
backrests approximately 45°.
– Push the cushion near the headrest guides slightly downward.
– Push the locking plate -1- all the way toward the retainer on
both headrest guides.
– Remove the headrest from the backrest.
Installing
Install in reverse order of removal.
2.24
Headrest Guide, Removing and Instal‐
ling
Removing
– Remove the backrest cover with the backrest cushion. Refer
to
⇒ “1.5 Backrest Cover and Cushion, Removing and Installing”,
.
Right Headrest Guide
– Press retaining tabs in -arrows- and simultaneously pull the
headrest guide -1- out of the backrest frame -2-.
Note
Ignore -item 3-.
Left Headrest Guide
– Press in the retaining tab -arrows- and simultaneously pull
headrest guide -1- out of the backrest frame -2-.
Installing
Install in reverse order of removal while paying attention to the
following:
Note
The headrest guide can only be inserted in one position.
• The tab -3- on the headrest guide must engage in the mount
cut-out on the backrest frame.
• The tabs must engage correctly in backrest frame.
2.25
Backrest Release Trim, Removing and
Installing
Removing
– Pull the operating lever -1- upward in direction of -arrow A-.
– Push a flat-head screwdriver between the trim and operating
lever, as shown in the illustration.
– Release the right catches in direction of -arrow B-.
– Hold the operating lever pushed -1-, push a flat-head screw‐
driver between the trim and operating lever, as shown in the
illustration.
– Release the left catches in direction of -arrow-.
– Bring the operating lever -1- back into the resting position.
– Disengage the trim -2- by hand in the direction of the -arrow-,
and if necessary push on the opposite side.
Installing
Install in reverse order of removal while paying attention to the
following:
– Pull the operating lever slightly upward, guide the trim over the
operating lever and engage the rear tabs in the backrest re‐
lease.
2.26
Backrest Release, Removing and Instal‐
ling
Removing
– Remove the backrest cover with the backrest cushion. Refer
to
⇒ “1.5 Backrest Cover and Cushion, Removing and Installing”,
– Pull the operating lever -1- upward and remove the bolt -2-.
– Push the backrest release mount -4- upward in direction of
-arrow- and disengage the connecting cable -3-.
– Disengage the backrest release retaining tabs -5-.
Installing
Install in reverse order of removal.
Tightening Specifications
♦ Refer to
⇒ “2.3 Overview - Backrest Release and Entry Assistance”,
♦ Refer to
⇒ “2.4 Overview - Front Backrest”, page 323
♦ Refer to
2.27
Connecting Cable, Removing and In‐
stalling
Removing
– Remove the backrest cover with the backrest cushion. Refer
to
⇒ “1.5 Backrest Cover and Cushion, Removing and Installing”,
.
– Pivot the backrest release bearing -1- upward in direction of
-arrow- until stop and hold in this position.
– Disengage the connecting cable -3- at the mount.
– Pivot the operating lever -2- upward until it stops.
– Disengage and remove the connecting cable from the oper‐
ating lever.
Installing
Install in reverse order of removal.
Tightening Specifications
♦ Refer to
⇒ “2.4 Overview - Front Backrest”, page 323
♦ Refer to
⇒ “2.2 Overview - Front Seat”, page 318
2.28
Backrest Release Mount, Removing
and Installing
Special tools and workshop equipment required
♦ Pop Rivet Pliers - VAG1753B-
♦ Drill
♦ Protective Eyewear
Removing
– Remove the backrest cover with the backrest cushion. Refer
to
⇒ “1.5 Backrest Cover and Cushion, Removing and Installing”,
.
– Remove the connecting cable. Refer to
⇒ “2.27 Connecting Cable, Removing and Installing”,
.
WARNING
Danger of eye injury.
♦ Wear protective eyewear.
– Pry the release cable -1- from the backrest release bearing
with a screwdriver in the direction of the -arrow-.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст