Volkswagen Golf / Golf GTI / Golf Variant. Manual — part 438
♦ Engine/Transmission Holder - Seat Repair Fixture - VAS6136-
♦ Airbag Lockout Adapter - VAS6282-
♦ Door Trim Pliers - 3392-
♦ Assembly Tool - 3399-
♦ Trim Removal Wedge - 3409-
74 – Seat Upholstery, Covers
1
Front Seat Covers and Cushions
⇒ “1.1 Overview - Seat Pan Cover and Cushion”, page 402
⇒ “1.2 Overview - Backrest Cover and Cushion”, page 403
⇒ “1.3 Overview - Seat Heating Element”, page 404
⇒ “1.4 Seat Pan Cover and Cushion, Removing and Installing”,
page 405
⇒ “1.5 Backrest Cover and Cushion, Removing and Installing”,
page 406
⇒ “1.6 Seat Pan Cover and Cushion, Separating”, page 408
⇒ “1.7 Backrest Cover and Cushion, Separating”, page 410
⇒ “1.8 Driver/Front Passenger Seat Heating Element Z6 / Z8 ,
Removing and Installing”, page 414
⇒ “1.9 Driver/Front Passenger Backrest Heating Element Z7 / Z9 ,
Removing and Installing”, page 415
1.1
Overview - Seat Pan Cover and Cushion
1 - Seat Pan
❑ Overview. Refer to
2 - Seat Cushion
❑ Allocation. Refer to the
Parts Catalog.
❑ Seat cover and cushion,
removing and installing.
Refer to
❑ Separate the seat cover
from the seat cushion.
Refer to
.
3 - Upholstery Clip
❑ For attachment of the
seat cover to the seat
cushion
❑ Replace after removing
❑ Install at the same loca‐
tion with Upholstery Clip
Pliers - VAG1634- .
4 - Seat Cover
❑ Different equipment lev‐
els
❑ Allocation. Refer to the
Parts Catalog.
❑ Seat cover and cushion,
removing and installing.
⇒ “1.4 Seat Pan Cover and Cushion, Removing and Installing”, page 405
❑ Separate the seat cover from the seat cushion. Refer to
⇒ “1.6 Seat Pan Cover and Cushion, Separating”, page 408
❑ Make sure there are no folds after installing
5 - Molding
❑ Sewn into seat cover
❑ For engaging seat cover on seat pan upper frame
❑ Make sure it fits correctly in the upper seat frame
6 - Molding
❑ Sewn into seat cover
❑ For engaging seat cover on seat pan upper frame
❑ Make sure it fits correctly in the upper seat frame
1.2
Overview - Backrest Cover and Cushion
1 - Upholstery Clip
❑ For attachment of back‐
rest cover to backrest
cushion
❑ Replace after removing
❑ Install at the same loca‐
tion with Upholstery Clip
Pliers - VAG1634- .
2 - Clamping Strip
❑ Sewn into backrest cov‐
er
❑ Check for proper seat‐
ing
3 - Backrest Cover
❑ Different equipment lev‐
els
❑ Allocation. Refer to the
Parts Catalog.
❑ Backrest cover and
cushion, removing and
installing. Refer to
.
❑ Backrest cover and
backrest cushion, sepa‐
rating. Refer to
❑ Make sure there are no
folds after installing
4 - Clip
❑ For securing the back‐
rest cover on the rear frame
❑ Right and left
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст