Volkswagen Golf / Golf GTI / Golf Variant. Manual — part 437
– Only loosen the cover and cushion near the release cable
-1-. Refer to
⇒ “2.4 Rear Seat Backrest Cover and Cushion, Removing and
.
– Unclip the connecting piece -2- with the release cable -1- from
the backrest frame in direction of -arrow A-.
– Unclip the release cable -1- from the bracket -arrow B-.
– Push the release cable -1- out of the cable bracket -arrow C-
for the rear seat backrest locking mechanism -3-.
– Disengage the pin for the release cable -1- from the rear seat
backrest locking mechanism -3- and remove the release cable
-1-.
Vehicle-Side Release Cable
– Remove the luggage compartment side trim panel. Refer to
⇒ “6.12 Luggage Compartment Side Trim Panel, Removing
– Remove the actuator for backrest remote release. Refer to
⇒ “3.18 Actuator for Rear Seat Backrest Remote Release,
Removing and Installing”, page 394
– Unclip the release cable -1- from the brackets -2- on the lug‐
gage compartment side trim panel and remove.
Installing
Install in reverse order of removal.
4
Special Tools
Special tools and workshop equipment required
♦ Trim Release Lever - T10039-
♦ Window Release Tool - T10236-
♦ Hook Tool - T40207-
♦ Torque Wrench 1331 5-50Nm - VAG1331-
♦ Torque Wrench 1410 - VAG1410-
♦ Pop Rivet Pliers - VAG1753B-
♦ Torque Wrench 1783 - 2-10Nm - VAG1783-
♦ Feeler Gauge - VAS5301/10-
♦ Engine And Transmission Holder - VAS6095-
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст