Volkswagen Golf / Golf GTI / Golf Variant. Manual — part 353
– Remove the bolts -2- for the center console -1-.
– Lift the center console -1- at the rear and remove it from the
instrument panel toward the rear.
– Carefully remove the center console -1- over the selector lev‐
er/gearshift lever and the parking brake lever.
Installing
Note
Check all the fasteners for damage and replace if necessary.
Install in reverse order of removal.
Tightening Specifications
♦ Refer to
⇒ “3.1 Overview - Center Console”, page 53
3.9
Center Console Bracket, Removing and
Installing
Special tools and workshop equipment required
♦ Torque Wrench 1783 - 2-10Nm - VAG1783-
Removing
– Remove the screw -1- on the left and right.
– Remove the bolt -2-.
– Pivot the mounting bracket -3- out of the center console.
Installing
Note
Check all the fasteners for damage and replace if necessary.
Install in reverse order of removal.
Tightening Specifications
♦ Refer to
4
Front Center Armrest
⇒ “4.1 Overview - Front Center Armrest”, page 62
⇒ “4.2 Front Center Armrest, Removing and Installing”,
4.1
Overview - Front Center Armrest
1 - Front Center Armrest
❑ Removing and instal‐
ling. Refer to
.
2 - Screw
❑ 3 Nm
❑ Quantity: 2
4.2
Front Center Armrest, Removing and In‐
stalling
Removing
– Remove the center console rear trim. Refer to
⇒ “3.3 Center Console Rear Trim, Removing and Installing”,
– Remove the air guide channel in the rear center console. Refer
to ⇒ Heating, Ventilation, and Air Conditioning; Rep. Gr. 87 ;
Air Routing; Overview - Air Routing and Air Distribution in Pas‐
senger Compartment .
– Remove the screw -2- on the left and right.
– Remove the front center armrest -1- upward from the center
console -3- in direction of -arrow-.
Installing
Note
Check all the fasteners for damage and replace if necessary.
Install in reverse order of removal.
Tightening Specifications
♦ Refer to
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст