Volkswagen Passat / Passat Variant (2011 year). Manual — part 74
5.3
Installing
Note
Only welding units authorised by Volkswagen AG may be used
5.3.1
Preparing new part
New part
♦ Tail light mounting
Passat 2011 ➤ , Passat Variant 2011 ➤
5. Renewing tail light mounting (Variant)
293
5.3.2
Welding in
– Adapt new part with vehicle standing on its wheels or align‐
ment bracket set and fix in position.
Passat 2011 ➤ , Passat Variant 2011 ➤
294
– Weld in new part, SG plug weld seam and RP spot weld seam.
– Weld in remaining joints to sealing channel, MIG continuous
weld seam.
– Install side panel for Variant,
.
Passat 2011 ➤ , Passat Variant 2011 ➤
5. Renewing tail light mounting (Variant)
295
6
Renewing C-pillar reinforcement
WARNING
Observe safety notes!
Welding, parting using spark generating machines/tools or tin‐
ning in foam treated areas creates gases which are hazardous
to health and environment. Therefore, refrain from using these
processes.
Safety notes ⇒ General Information; Body Repairs, General Body
Repairs ; Safety notes
• Side panel already removed
.
1 - Cutting point
2 - C-pillar reinforcement
3 - Inner side panel
4 - Moulded foam element
5 - Side panel
Part section removed.
Passat 2011 ➤ , Passat Variant 2011 ➤
296
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст