Volkswagen Passat / Passat Variant (2011 year). Manual — part 80
9
Renewing inner D-pillar
WARNING
Observe safety notes!
Safety notes ⇒ General Information; Body Repairs, General Body
Repairs ; Safety notes
• Side panel already removed
• Tail light mounting already removed
• Cross panel already removed
1 - Sealing channel
2 - Inner D-pillar
3 - Rear longitudinal member
4 - Bonded area
5 - D-pillar reinforcement
Passat 2011 ➤ , Passat Variant 2011 ➤
9. Renewing inner D-pillar
317
Tools
Note
♦
The use of different types and different thicknesses of steel
requires that only the welding units (inverters) authorised by
Volkswagen AG may be used to carry out repairs properly.
♦
The welding units (inverters) and body tools authorised by
Volkswagen AG are listed in ⇒ ServiceNet, Workshop Equip‐
ment, EH catalogue, Workshop equipment, Body and paint‐
work .
9.2
Removing
– Separate original joint to inner side panel and to rear longitu‐
dinal member.
Passat 2011 ➤ , Passat Variant 2011 ➤
318
surface back to bare metal.
9.3
Installing
Note
Only welding units authorised by Volkswagen AG may be used
9.3.1
Preparing new part
New part
♦ Inner D-pillar (parts designation: reinforcement)
♦ 2K body adhesive -D 180 KD3 A2-
Passat 2011 ➤ , Passat Variant 2011 ➤
9. Renewing inner D-pillar
319
the factory.
9.3.2
Welding in
– Adapt new part with vehicle standing on its wheels or align‐
ment bracket set and fix in position.
Passat 2011 ➤ , Passat Variant 2011 ➤
320
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст