Volkswagen Passat / Passat Variant (2011 year). Manual — part 78
the factory.
– Weld in lock reinforcement -1-, RP spot weld seam.
– Install side panel
Passat 2011 ➤ , Passat Variant 2011 ➤
7. Renewing C-pillar reinforcement (Variant)
309
8
Renewing D-pillar reinforcement -
part section
Includes: sealing channel - part section
WARNING
Observe safety notes!
Welding, parting using spark generating machines/tools or tin‐
ning in foam treated areas creates gases which are hazardous
to health and environment. Therefore, refrain from using these
processes.
Safety notes ⇒ General Information; Body Repairs, General Body
Repairs ; Safety notes
• Side panel already removed
.
• Tail light mounting already removed
.
1 - Moulded foam elements
2 - Cutting point
3 - D-pillar reinforcement
4 - Sealing channel
5 - Bonded area
Passat 2011 ➤ , Passat Variant 2011 ➤
310
Tools
Note
♦
The use of different types and different thicknesses of steel
requires that only the welding units (inverters) authorised by
Volkswagen AG may be used to carry out repairs properly.
♦
The welding units (inverters) and body tools authorised by
Volkswagen AG are listed in ⇒ ServiceNet, Workshop Equip‐
ment, EH catalogue, Workshop equipment, Body and paint‐
work .
8.2
Removing
Note
Do not damage underlying panels when cutting out.
– Position parting cut on sealing channel -1- as shown and cut
out.
Passat 2011 ➤ , Passat Variant 2011 ➤
8. Renewing D-pillar reinforcement - part section
311
– Position parting cut at D-pillar reinforcing as shown and cut
out.
– Separate original joint.
Passat 2011 ➤ , Passat Variant 2011 ➤
312
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст