Volkswagen Passat / Passat Variant (2011 year). Manual — part 89
Tools
Note
♦
The use of different types and different thicknesses of steel
requires that only the welding units (inverters) authorised by
Volkswagen AG may be used to carry out repairs properly.
♦
The welding units (inverters) and body tools authorised by
Volkswagen AG are listed in ⇒ ServiceNet, Workshop Equip‐
ment, EH catalogue, Workshop equipment, Body and paint‐
work .
13.2
Removing
– Separate original joint to C-pillar reinforcing and to inner wheel
housing liner.
– Separate bonded areas -1- between lock reinforcing and
wheel housing liner.
Passat 2011 ➤ , Passat Variant 2011 ➤
13. Renewing outer wheel housing liner
353
-1- and to rear connecting plate -2-.
Passat 2011 ➤ , Passat Variant 2011 ➤
354
surface back to bare metal.
13.3
Installing
Note
Only welding units authorised by Volkswagen AG may be used
Passat 2011 ➤ , Passat Variant 2011 ➤
13. Renewing outer wheel housing liner
355
Preparing new part
New part
♦ Outer wheel housing liner -1-
♦ Reinforcing plate -2-
♦ 2K body adhesive -D 180 KD3 A2-
– Grind bonding surfaces back to bare metal.
13.3.2
Welding in
Note
New part must be welded in within 90 minutes or adhesion of ad‐
hesive will be impaired.
Passat 2011 ➤ , Passat Variant 2011 ➤
356
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст