Volkswagen Passat / Passat Variant (2011 year). Manual — part 42
tips.
Passat 2011 ➤ , Passat Variant 2011 ➤
5. Renewing roof side member
165
weld seam are permitted.
Note
Both weld symbols are shown in the figure.
– Weld roof side member to door apertures, RP spot weld seam
(inverter).
5.4
Foam treating roof side member
5.4.1
Treating with foam
– Heat 2K structural foam cartridge in an approx. 60 °C water
bath for 20 minutes.
Passat 2011 ➤ , Passat Variant 2011 ➤
166
– Open cap
2 - Static mixer
– Cut of the front section
of the cone only.
3 - Extension hose
4 - Textile adhesive tape
Note
5 - Adapter
Note
6 - Union nut
– Connect static mixer -2-
to 2K structural foam
cartridge -1- using union
nut.
Passat 2011 ➤ , Passat Variant 2011 ➤
5. Renewing roof side member
167
-arrow- in roof -1- using pneumatic cartridge gun -V.A.G
1761/1- and static mixer.
– Then seal opening with a blind rivet nut.
Passat 2011 ➤ , Passat Variant 2011 ➤
168
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст