Volkswagen Jetta / Jetta Hybrid. Manual — part 29
Carry out following work:
• The clips -2- are not damaged, otherwise renew.
– Press seal -1- with clips -2- onto door -3- beginning at A-pillar.
Jetta 2011 ➤ , Jetta Hybrid 2013 ➤
2. Door components
113
WARNING
Before installing door trim, check that the holes in the door
panel are sealed with respective stickers
⇒ page 114
.
1 - Insulation
❑ Self-adhesive.
❑ Installing:
– Cut to size if necessary.
– Warm using hot air
blower -V.A.G 1416-
and push on to outer
door panel with force.
2 - Sticker
❑ If necessary, manufac‐
ture using commercially
available textile adhe‐
sive tape.
3 - Foam element
❑ Jammed into door.
Jetta 2011 ➤ , Jetta Hybrid 2013 ➤
114
3.1
Fitting location overview - central locking components
1 - Coupling station
❑ Fitting location: left A-
pillar
❑ To separate connec‐
tions, release bellows at
pillar.
2 - Front passenger door con‐
trol unit -J387-
❑ Integrated in window
regulator motor, front
passenger side -V148-
❑ Removing and installing
⇒ page 212
3 - Door lock on front passen‐
ger side
❑ Door lock is secured to
inner part of door.
❑ Electric central locking
is integrated into door
lock.
❑ Removing and installing
⇒ page 100
4 - Coupling station
❑ Fitting location: right B-
pillar.
❑ To separate connec‐
tions, release bellows at
pillar.
5 - Rear right door control unit
-J389-
❑ Integrated in rear right
window regulator motor
-V27-
❑ Removing and installing
⇒ page 225
6 - Rear right door lock
❑ Door lock is secured to inner part of door.
❑ Electric central locking is integrated into door lock.
❑ Removing and installing
⇒ page 140
7 - Tank filler flap locking motor -V155-
❑ Removing and installing
⇒ page 73
8 - Rear lid lock
❑ Fitting location: on rear lid
❑ Removing and installing
⇒ page 66
9 - Rear lid handle release button -E234-
❑ Fitting location: on rear lid
❑ Removing and installing
⇒ page 65
Jetta 2011 ➤ , Jetta Hybrid 2013 ➤
3. Central locking
115
⇒ page 140
11 - Rear left door control unit -J388-
❑ Integrated in rear left window regulator motor -V26-
❑ Removing and installing
⇒ page 225
12 - Door lock on driver side
❑ Door lock is secured to inner part of door.
❑ Electric central locking is integrated into door lock.
❑ Removing and installing
⇒ page 100
13 - Coupling station
❑ Fitting location: left B-pillar
❑ To separate connections, release bellows at pillar.
14 - Driver door control unit -J386-
❑ Integrated in window regulator motor, driver side -V147-
❑ Removing and installing
⇒ page 212
15 - Switch module of window regulator, driver side
and installing switch module of window regulator, driver side
16 - Coupling station
❑ Fitting location: right A-pillar
❑ To separate connections, release bellows at pillar.
17 - Onboard supply control unit -J519-
❑ Location: below driver side of dash panel, clipped onto relay carrier
❑ Removing and installing ⇒ Electrical system; Rep. gr. 97 ; Control units; Onboard supply control unit -
J519-
18 - Alarm horn -H12-
installing alarm horn -H12- .
19 - Bonnet contact switch -F266-
Removing and installing bonnet contact switch -F266-
3.2
Adapting keys with remote control
Keys with remote control are adapted using the vehicle diagnosis,
testing and information system -VAS 5051B- .
– Select “guided fault finding” in vehicle diagnostic tester -
VAS 5051 B- .
– Using the
GoTo
key, select “Function/component selection”
and the following menu items one after the other:
♦ Body
♦ Electrical system (Rep. Gr. 01; 27; 90…97)
♦ 01 - Systems capable of self-diagnosis
Jetta 2011 ➤ , Jetta Hybrid 2013 ➤
116
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст