Volkswagen Jetta / Jetta Hybrid. Manual — part 46
2.1
Tools
Special tools and workshop equipment required
♦ Torque wrench -V.A.G 1783-
♦ Torque wrench -V.A.G 1331-
2.2
Repairing rear bumper cover
Note
If rear bumper cover is damaged, determine whether plastic can
be repaired before renewing bumper.
Description under: ⇒ General Information; Body Repairs, General
Body Repairs ; Plastic repair procedures
2.3
Installing brackets for parking aid sys‐
tem
2.3.1
Tools
Special tools and workshop equipment required
Jetta 2011 ➤ , Jetta Hybrid 2013 ➤
2. Rear bumper cover
181
2.3.2
Materials
♦ 2-component plastic adhe‐
sive -D 180 K2 A1-
3)
1
4)
2
♦ Bonding agent for plastics -D
822 150 A1-
3)
1
♦ Cleaning solution -D 009 401
04-
3)
1
♦ Primer applicator
3) Observe manufacturer's instructions enclosed in the packaging.
4) Observe minimum curing period
⇒ page 186
.
2.3.3
Installing brackets
Note
The brackets are installed after the bumper cover has been pain‐
ted.
Jetta 2011 ➤ , Jetta Hybrid 2013 ➤
182
mined.
– The holes must be drilled from the inside to the outside with
the drill in the tool kit -3-.
Jetta 2011 ➤ , Jetta Hybrid 2013 ➤
2. Rear bumper cover
183
-5-.
– Screw on punch -4-, not quite as far as bumper cover.
– Press punch -4- against bumper cover.
– Tighten hole puncher -1-.
Note
The punch -4- must not turn on the paint of the bumper cover.
– Pull the punch -4- through the material of the bumper cover
-5- -arrows- by turning the bolt head -1-.
– Remove hole puncher and make the next holes.
– Thoroughly clean bumper cover and bracket with cleaning sol‐
ution.
Jetta 2011 ➤ , Jetta Hybrid 2013 ➤
184
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст