Volkswagen Jetta / Jetta Hybrid. Manual — part 16
2.8.1
Removing
Carry out following work:
– Removing rear lid -1-
⇒ page 55
.
If the left hinge -6- is to be removed:
– Remove electric cable -5- from left hinge -6-.
If the right hinge -2- is to be removed:
– Remove gas strut -4- from ball-head pin at right hinge -2-
⇒ page 57
.
70 ; Pillar and side panel trims .
– Undo and remove bolts -7- and remove left hinge -2-/ right
hinge -6-.
Jetta 2011 ➤ , Jetta Hybrid 2013 ➤
2. Rear lid
61
Carry out following work:
Installation of hinge is carried out in reverse order of removal.
Specified torque for bolts -4-: 9 Nm.
– Adjusting rear lid
⇒ page 64
.
• Before closing rear lid, check function of lid release compo‐
nents.
Jetta 2011 ➤ , Jetta Hybrid 2013 ➤
62
2.9.1
Removing
Carry out following work:
– Remove cover of striker plate in lock carrier cover.
– Undo bolts -2- and remove striker plate -1- from lock carrier
-3-.
2.9.2
Installing
Carry out following work:
– Mount striker plate -1- on lock carrier -3- with bolts -2-.
Specified torque of bolts -2-: 18 Nm
– Adjust striker plate
⇒ page 65
.
– Install cover of striker plate into lock carrier cover.
Jetta 2011 ➤ , Jetta Hybrid 2013 ➤
2. Rear lid
63
Note
♦
Vehicle must be standing on its wheels to enable rear lid to be adjusted.
♦
The rear lid lock -3- is bolted directly to the rear lid -1-. It does not have elongated holes, so it cannot be
adjusted.
♦
The adjustment buffers -2- on the left and right are not a means of adjustment. Their purpose is to stabilise
and dampen the rear lid -1-.
♦
The rear lid is adjusted correctly if the gaps/shut lines are even all around, the door is not too deep or does
not stand proud and all contours align when the rear lid is closed.
♦
The rear lid must engage in the striker plate without excessive force being applied.
Carry out following work:
Use the setting gauge -3371- ⇒ Body Repairs; Rep. gr. 00 ;
Bodywork gaps/shut lines; Front body to check or set the gap di‐
mensions.
– By loosening the bolts -4-, it is possible to adjust rear lid -1- in
oversized holes of hinge -arrows a- and -b-.
Jetta 2011 ➤ , Jetta Hybrid 2013 ➤
64
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст