Volkswagen Jetta / Jetta Hybrid. Manual — part 14
Carry out following work:
– Loosen bolts -3-.
– Striker pin -2- can now be adjusted in oversized holes.
Specified torque for bolts -3-: 10 Nm.
Jetta 2011 ➤ , Jetta Hybrid 2013 ➤
1. Bonnet
53
2.1
Tools
Special tools and workshop equipment required
♦ Torque wrench -V.A.G 1331-
♦ Setting gauge -3371-
Jetta 2011 ➤ , Jetta Hybrid 2013 ➤
54
1 - Rear lid
❑ Removing and installing
⇒ page 55
❑ Adjusting
⇒ page 64
2 - Wiring harness
3 - Adjustment buffer
❑ Left and right.
❑ Adjusting
⇒ page 64
4 - Lid lock
❑ Removing and installing
⇒ page 66
❑ With emergency re‐
lease function
⇒ page 66
5 - Hinge
❑ Removing and installing
⇒ page 61
6 - Gas strut
❑ Removing and installing
⇒ page 57
❑ Releasing gas
⇒ page 60
7 - Striker plate
❑ Removing and installing
⇒ page 63
❑ Adjusting
⇒ page 65
❑ Assignment ⇒ Parts
catalogue “ETKA”
8 - Registration plate light
❑ Removing and installing
⇒ Electrical system;
Rep. gr. 94 ; Removing and installing registration plate lights .
9 - Button to release rear lid
❑ Removing and installing
⇒ page 65
2.3
Removing and installing rear lid
2.3.1
Removing
Carry out following work:
– Remove rear lid trim ⇒ General body repairs, interior; Rep.
gr. 70 ; Rear lid trim .
– Remove connectors of all installed electrical components.
Jetta 2011 ➤ , Jetta Hybrid 2013 ➤
2. Rear lid
55
– Loosen bolts -3- on left and right hinges (do not unbolt com‐
pletely).
Further dismantling requires the assistance of a second mechan‐
ic.
– Now, remove bolts -3- completely and then remove rear lid
-1-.
2.3.2
Installing
Carry out following work:
Installation of rear lid -1- is carried out in reverse order of removal.
Specified torque for bolts -3- 9 Nm
– Adjusting rear lid
⇒ page 64
.
• Before closing rear lid, check function of lid release compo‐
nents.
Jetta 2011 ➤ , Jetta Hybrid 2013 ➤
56
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст