Volkswagen Jetta / Jetta Hybrid. Manual — part 13
1.13.1
Removing
Carry out following work:
– Pull release lever -1- to release bonnet.
– Insert a small screwdriver in gap between release lever -1- and
retaining clip -2-.
– Lever retaining clip -2- out of operating lever -1- -arrow a- and
pull operating lever off mounting bracket -3- -arrow b-.
For further work on mounting bracket -3-, A-pillar lower trim -4-
Pillar and side panel trim .
Jetta 2011 ➤ , Jetta Hybrid 2013 ➤
1. Bonnet
49
Carry out following work:
• Lower A-pillar trim -4- has been fitted.
– Push retaining clip -2- into release lever -1-.
– Press retaining lever -1- onto mounting bracket -3-.
• Before closing bonnet, check function of release lever and re‐
lease cable.
Jetta 2011 ➤ , Jetta Hybrid 2013 ➤
50
Note
♦
Vehicle must be standing on its wheels to enable bonnet to be adjusted.
♦
The adjustment buffers -2- on the left and right are not a means of adjustment. They have the function of
stabilising and damping the bonnet.
♦
The bonnet is adjusted correctly if the gaps/shut lines are even all around, the door is not too deep or does
not protrude and all contours align when the is door closed.
♦
The bonnet must engage into the bonnet lock without excessive force.
♦
Nuts -4- are not removed, only loosened.
Carry out following work:
– Remove striker pin -1-
⇒ page 46
.
– Bonnet can be centred between wings by loosening (not re‐
moving) hexagon nuts -4- on left and right bonnet hinges -5-.
– Ensure that gaps are uniform ⇒ Body Repairs; Rep. gr. 00 ;
Technical data; Body panel gaps/shut lines; Body - front .
Jetta 2011 ➤ , Jetta Hybrid 2013 ➤
1. Bonnet
51
– Turn adjusting buffer -2- to adjust -arrow-.
– After bonnet has been adjusted, the striker pin -1- can be re-
installed and adjusted
⇒ page 53
.
– Front part of bonnet can be adjusted in height to wings by
means of bonnet lock -3-
⇒ page 52
.
1.14.1
Adjusting lid lock
Carry out following work:
– Remove radiator grille
⇒ page 261
.
– Slacken bolts -2- to adjust bonnet lock -1- to bonnet laterally
00 ; Body panel gaps/shut lines; Body - front
Specified torque for bolts -2-: 12 Nm.
Jetta 2011 ➤ , Jetta Hybrid 2013 ➤
52
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст