Volkswagen Jetta / Jetta Hybrid. Manual — part 12
– Fit cable -2- to cable coupling
⇒ page 45
.
– Adjust bonnet lock
⇒ page 52
.
– Install radiator grille
⇒ page 261
.
• Before closing bonnet, check function of release lever and re‐
lease cable.
1.10
Detaching release cable
Carry out following work:
– Open bonnet.
– Unclip cable coupling cover -2- above driver-side headlight
from lock carrier.
– Remove cover -2- from cables -1- and -3- -arrows a-.
– Turn cable -1- by 90° -arrow b- and remove cable -1- in
-direction of arrow c- from the cable mounting -2-.
Jetta 2011 ➤ , Jetta Hybrid 2013 ➤
1. Bonnet
45
• Before closing bonnet, check function of release lever and re‐
lease cables.
1.11
Removing and installing striker pin
1.11.1
Removing
Carry out following work:
– Open bonnet -1-.
– Remove bolts -3-.
– Remove striker pin -2- from bonnet -1-.
Jetta 2011 ➤ , Jetta Hybrid 2013 ➤
46
Carry out following work:
Installation of the striker pin -2- is carried out in the reverse order
of removal.
Specified torque for bolts -3-: 10 Nm.
– Adjusting striker pin
⇒ page 53
.
Jetta 2011 ➤ , Jetta Hybrid 2013 ➤
1. Bonnet
47
1 - Mounting bracket
2 - Cable
❑ Installing:
– Insert ball of cable into
holder on mounting
bracket.
– Clip cable into mounting
bracket
3 - Expanding nut
❑ Qty. 2.
4 - Bolt
❑ Qty. 2.
❑ Specified torque: 1.5
Nm
5 - Release lever
❑ Removing and installing
⇒ page 49
Jetta 2011 ➤ , Jetta Hybrid 2013 ➤
48
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст