Volkswagen Jetta / Jetta Hybrid. Manual — part 60
Carry out following work:
– Remove wheel ⇒ Running gear; Rep. gr. 44 ; Specified tor‐
ques for wheel bolts .
– Remove bolts -2- (Qty. 12).
– Pull wheel housing liner -1- out of wing.
Jetta 2011 ➤ , Jetta Hybrid 2013 ➤
1. Wheel housing liner
237
Carry out following work:
Note
Check spreader nuts -3- for damage and renew if necessary.
wheel bolts .
Jetta 2011 ➤ , Jetta Hybrid 2013 ➤
238
Note
♦
Minor differences may be encountered in respect of wheel housing liner, depending on vehicle model.
♦
Only the left side is shown. The right side is similar.
1 - Wheel housing liner
❑ Material PP/EPDM.
❑ Removing and installing
⇒ page 240
2 - Bolt
❑ Qty. 10.
❑ Specified torque: 2 Nm
3 - Expanding nut
❑ Qty. 5.
❑ Renew if damaged
4 - Expanding nut
❑ Gas-tight.
WARNING
♦
Check gas-tight spreader
nuts for damage and re‐
new if necessary.
♦
The spreader nut seals
the interior against ex‐
haust gases and must al‐
ways be renewed in the
event of damage.
Jetta 2011 ➤ , Jetta Hybrid 2013 ➤
1. Wheel housing liner
239
housing liner
1.5.1
Removing
Carry out following work:
– Remove wheel ⇒ Running gear; Rep. gr. 44 ; Specified tor‐
ques for wheel bolts
– Remove bolts -2- (Qty. 10).
– Pull wheel housing liner -1- out of wing.
Jetta 2011 ➤ , Jetta Hybrid 2013 ➤
240
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст