Volkswagen Jetta Hybrid (2013 year). Manual — part 21
.
The gearbox and gearbox support -VAS 6100- are lifted into en‐
gine and gearbox support -VAS 6095- using workshop hoist -VW
353- .
Jetta Hybrid 2013 ➤
4. Installing to engine and gearbox support
77
⇒ “5.1 Assembly overview - assembly mountings”, page 78
5.1
Assembly overview - assembly mountings
1 - Bolt
gr. 10 ; Assembly
mountings; Assembly
overview - assembly
mountings
2 - Bolt
gr. 10 ; Assembly
mountings; Assembly
overview - assembly
mountings
3 - Bolt
gr. 10 ; Assembly
mountings; Assembly
overview - assembly
mountings
4 - Pendulum support
❑ Removing and installing
bly mountings; Assem‐
bly overview - assembly
mountings
5 - Bolt
gr. 10 ; Assembly
mountings; Assembly
overview - assembly
mountings
6 - Bolt
gr. 10 ; Assembly
mountings; Assembly
overview - assembly
mountings
7 - Bracket
8 - Bolt
9 - Bolt
10 - Bolt
11 - Engine mounting
12 - Bolt
Jetta Hybrid 2013 ➤
78
14 - Bolt
15 - Bolt
❑ Renew after each removal.
❑ 60 Nm +90°
16 - Bolt
❑ Renew after each removal.
❑ 40 Nm +90°
17 - Gearbox bracket
❑ Removing and installing
⇒ page 79
.
18 - Gearbox mounting
5.1.1
Removing and installing gearbox brack‐
et
Gearbox is installed.
Jetta Hybrid 2013 ➤
5. Assembly mountings
79
A-
♦ 2 x spindle -10 - 222 A /11-
♦ 2 x adapters -10 - 222 A /
28-
♦ 2 x adapters -10 - 222 A /
28-2-
♦ Adapter -10 - 222 A /31-
♦ Hook rail -T40091/2- from
engine support basic set -
T40091-
♦ Mounting -T40093/5- from
engine support supplemen‐
tary set -T40093-
♦ 2 x square section tubes -
T40091/1- from engine
support basic set -T40091-
♦ 2 x rotary joint -T40091/3-
from engine support basic
set -T40091-
♦ 2 x rotary joint -T40093/4-
from engine support sup‐
plementary set -T40093-
Removing gearbox bracket
Vehicles with secondary air system
– Unclip cover for air damper -1- upwards from mountings
-arrows- and remove it.
Jetta Hybrid 2013 ➤
80
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст