Nissan Versa Note. Instruction — part 221
REAR DOOR LOCK
DLK-169
< REMOVAL AND INSTALLATION >
[WITH INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
5. Remove front gasket and rear gasket.
6. Slide outside handle bracket toward rear of vehicle to remove.
: Front
7. Disconnect outside handle cable (1) from outside handle bracket
(2) as shown.
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
• After installation, check door open/close, lock/unlock operation.
• Check door lock cable is properly engaged with outside handle bracket.
JMKIA5890ZZ
JMKIA5891ZZ
DLK-170
< REMOVAL AND INSTALLATION >
[WITH INTELLIGENT KEY SYSTEM]
BACK DOOR LOCK
BACK DOOR LOCK
Exploded View
INFOID:0000000008969451
BACK DOOR LOCK
BACK DOOR LOCK : Removal and Installation
INFOID:0000000009561117
REMOVAL
1. Remove back door inner finisher. Refer to
INT-36, "BACK DOOR INNER FINISHER : Removal and Instal-
.
2. Remove back door outer finisher. Refer to
EXT-46, "Removal and Installation"
3. Disconnect lock rod from key cylinder (if equipped).
4. Disconnect the harness connectors from the back door lock.
5. Disconnect door lock cable from handle.
6. Remove back door lock bolts and back door lock.
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
• Tighten back door bolts to specification.
• After installation, check back door open/close and lock/unlock operation.
OUTSIDE HANDLE
OUTSIDE HANDLE : Removal and Installation
INFOID:0000000009561118
REMOVAL
1. Remove back door outer finisher. Refer to
EXT-46, "Removal and Installation"
2. Release the back door lock cable from the outside handle.
3. Remove outside handle bolts and outside handle.
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
• Tighten outside handle bolts to specification. Refer to
.
1.
Outside handle
2.
Back door lock cable
3.
Back door lock actuator
4.
Back door lock
5.
Door striker
AWKIA2578ZZ
BACK DOOR LOCK
DLK-171
< REMOVAL AND INSTALLATION >
[WITH INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
• After installation, check back door open/close and lock/unlock operation.
EMERGENCY LEVER
EMERGENCY LEVER : Removal and Installation
INFOID:0000000009561119
UNLOCK PROCEDURE
NOTE:
If back door lock cannot be unlocked due to a malfunction or battery discharge, perform the following proce-
dure to unlock back door assembly.
From inside the vehicle, using a suitable tool, rotate the emergency
lever (1) in a clockwise direction to unlock the back door assembly.
AWKIA2577ZZ
DLK-172
< REMOVAL AND INSTALLATION >
[WITH INTELLIGENT KEY SYSTEM]
FUEL FILLER LID OPENER
FUEL FILLER LID OPENER
Exploded View
INFOID:0000000008969452
FUEL FILLER LID
FUEL FILLER LID : Removal and Installation
INFOID:0000000009486685
REMOVAL
1. Remove fuel cap pin (1).
1.
Fuel filler lid lock release cable
2.
Fuel filler lid lock
3.
Fuel filler lid bumper
4.
Fuel filler lid spring
5.
Fuel filler lid
A.
Clip
B.
Cable protector
Pawl
AWKIA2582ZZ
ALKIA3198ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст