Nissan Quest E52. Instruction — part 666
BACK DOOR MOLDING
EXT-39
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
L
M
A
B
EXT
N
O
P
BACK DOOR MOLDING
Exploded View
INFOID:0000000009650513
Removal and Installation
INFOID:0000000009650514
BACK DOOR UPPER MOLDING
Removal
1.
Insert a remover tool between back door upper molding and back door panel and remove mounting clips
of back door upper molding.
CAUTION:
Be careful not to damage glass with the remover tool.
2.
Remove back door upper molding.
Installation
Note the following items, and install in the reverse order of removal.
CAUTION:
• Never reuse back door upper molding and faster clip once they are removed.
• Be sure to install new fastener clips on back door.
• Install fastener clip so that arrow marks on fastener clip are
always facing up.
BACK DOOR LOWER MOLDING
Removal
1.
Insert a remover tool between back door lower molding and back door panel and remove mounting clips
of back door lower molding.
1.
Fastener clip
2.
Back door upper molding
3.
Back door lower molding
: Clip
: Always replace after every disassembly.
JMKIA8276ZZ
JMKIA8277ZZ
EXT-40
< REMOVAL AND INSTALLATION >
BACK DOOR MOLDING
CAUTION:
Be careful not to damage back door glass with the remover tool.
2.
Remove back door lower molding.
Installation
Note the following items, and install in the reverse order of removal.
CAUTION:
• Never reuse back door lower molding and fastener clip once they are removed.
• Be sure to install new fastener clips on back door.
• Install fastener clip so that arrow marks on fastener clip are
always facing down.
JMKIA8277ZZ
DOOR PARTING SEAL
EXT-41
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
L
M
A
B
EXT
N
O
P
DOOR PARTING SEAL
Exploded View
INFOID:0000000009650515
Removal and Installation
INFOID:0000000009650516
REMOVAL
1.
Fully open front door and slide door.
2.
Disengage mounting clips of door parting seal using a remover
tool (A), and then remove door parting seal.
CAUTION:
Apply protective tape (B) on the part to protect it from dam-
age.
INSTALLATION
Install in the reverse order of removal.
1.
Door parting seal
: Vehicle front
JMKIA6192ZZ
: Clip
JMKIA6193ZZ
EXT-42
< REMOVAL AND INSTALLATION >
SLIDE DOOR PARTING SEAL
SLIDE DOOR PARTING SEAL
Exploded View
INFOID:0000000009650517
Removal and Installation
INFOID:0000000009650518
REMOVAL
1.
Fully open slide door.
2.
Remove slide door parting seal fixing screw.
3.
Disengage slide door parting seal fixing clip, using a remover
tool (A), and then remove slide door parting seal.
CAUTION:
Apply protective tape (B) on the part to protect it from dam-
age.
INSTALLATION
Install in the reverse order of removal.
1.
Slide door parting seal
2.
Plug
: Clip
JMKIA6194ZZ
: Clip
JMKIA6195ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст